User Manual

Configuration Guide for User Access Level
85
Section Header
Parameters and
Default Value
Configuration Items on the Web User
Interface
[ HiddenSetting ]
(1 for SIP VP-T49G IP
phones; only
applicable to SIP
VP-T49G/SIP-T48G/
T48S/T46G/T46S/
T29G IP phones)
remote_pcap_switch
= 2
(only applicable to
SIP-T48G/T48S/T46G/
T46S/T29G IP phones)
Hidden->Remote Pcap
Hidden->Remote Pcap Port
Hidden->Remote Pcap Password
remote_pcap = 2
(only applicable to
SIP-T48G/T48S/T46G/
T46S/T29G IP phones)
Hidden->Remote Pcap
remote_pcap_port = 2
(only applicable to
SIP-T48G/T48S/T46G/
T46S/T29G IP phones)
Hidden->Remote Pcap Port
remote_pcap_passwor
d = 2
(only applicable to
SIP-T48G/T48S/T46G/
T46S/T29G IP phones)
Hidden->Remote Pcap Password
pushxml = 2
(not applicable to
W56P IP DECT
phones)
Hidden->PushXML Test
The following table lists configuration items in the WebItemsLevel.cfg file for configurations
only integrated with BroadSoft UC-One firmware version on the web user interface.
Section Header
Parameters and
Default Value
Configuration Items on the Web User
Interface
[ General-Informat
EnableAutoFavorite = 0
Features->General Information->Enable