User Manual

Configuration Guide for User Access Level
71
Section Header
Parameters and
Default Value
Configuration Items on the Web User
Interface
[ Settings-Config ]
(not applicable to SIP
VP-T49G/CP860/
W56P IP phones)
ExportAllDiagnosticFil
es = 2
(not applicable to SIP
VP-T49G/CP860/
W56P IP phones)
Settings->Configuration->Export All
Diagnostic Files
[ Settings-DialPlan
]
replace-rule = 0
Settings->Dial Plan->Replace Rule (the
whole page)
dial-now = 0
Settings->Dial Plan->Dial Now (the whole
page)
area-code = 0
Settings->Dial Plan->Area Code (the whole
page)
block-out = 0
Settings->Dial Plan->Block Out (the whole
page)
replace-rule-control =
0
Settings->Dial Plan->Replace Rule->Prefix
Settings->Dial Plan->Replace
Rule->Replace
Settings->Dial Plan->Replace
Rule->Account (not applicable to
SIP-T19(P) E2/CP860 IP phones)
dial-now-control = 0
Settings->Dial Plan->Dial Now->Rule
Settings->Dial Plan->Dial Now->Account
(not applicable to SIP-T19(P) E2/CP860 IP
phones)
area-code-control = 0
Settings->Dial Plan->Area Code->Code
Settings->Dial Plan->Area Code->Min
Length (1-15)
Settings->Dial Plan->Area Code->Max
Length (1-15)
Settings->Dial Plan->Area Code->Account
(not applicable to SIP-T19(P) E2/CP860 IP
phones)
block-out-control = 0
Settings->Dial Plan->Block Out->BlockOut
NumberX(X=1,2,…,10)