User Manual

Configuration Guide for User Access Level
37
Section Header
Parameters and
Default Value
Configuration Items on the Web User
Interface
[ Network-Basic ]
ipv4config = 0
(2 for SIP
VP-T49G/CP860/
W56P IP phones)
Network->Basic->IPv4 Config
ipv6config = 0
(2 for SIP
VP-T49G/CP860 IP
phones; not
applicable to W56P IP
DECT phones)
Network->Basic->IPv6 Config
wan-ppoe = 2
(only applicable to VP
SIP-T49G/W56P IP
phones)
Network->Basic->PPPoE
Network->Basic->PPPoE->User Name
Network->Basic->PPPoE->Password
[ Network-PCPort
]
pcport-active = 0
(not applicable to
CP860/W56P IP
phones)
Network->PC Port->PC Port Active
[ Network-Nat ]
(not applicable to
SIP
VP-T49G/CP860/
W56P IP phones)
manual = 2
Network->NAT->Nat Manual
manual-switch = 2
Network->NAT->Nat Manual->Active
manual-ip = 2
Network->NAT->Nat Manual->IP Address
ICE = 2
Network->NAT->ICE
ICE-switch = 2
Network->NAT->ICE->Active
STUN = 2
Network->NAT->STUN