User Manual

Configuration Guide for User Access Level
20
To configure user access level feature for Yealink IP phones:
1. Edit the following parameters in the configuration file (e.g., features.cfg).
Parameters
Permitted Values
Default
static.security.var_enable
0 or 1
0
Description:
This parameter is used to enable or disable the login of the web/phone user interface
with different access levels.
0-Disabled
1-Enabled
Note: It takes effect after reboot.
Web User Interface:
None
Phone User Interface:
None
static.security.default_access_level
0, 1 or 2
0
Description:
This parameter is used to configure the default access level to access the phone user
interface.
0-user
1-var
2-admin
Note: It works only if the value of the parameter “static.security.var_enable” is set to 1
(Enabled). It takes effect after reboot.
Web User Interface:
None
Phone User Interface:
None
static.web_item_level.url
FTP, TFTP, HTTP or
Blank