User Manual

Configuration Guide for User Access Level

Parameters

Permitted Values

Default

None

Phone User Interface:

None

web_item_level.url

FTP, TFTP, HTTP or

HTTPS download URL

Blank

Description:

This parameter is used to configure the access URL of the WebItemsLevel.cfg file.

Note: It takes effect after reboot.

Web User Interface:

None

Phone User Interface:

None

The parameter settings in the configuration file for reference are shown as below:

security.var_enable = 1

web_item_level.url = ftp://192.168.1.100/WebItemsLevel.cfg

security.default_access_level = 1

2. Upload the configuration file to the directory of the provisioning server.

3. Configure the access URL of the provisioning server for the IP phone.

4. Trigger the IP phone to perform auto provisioning.

For more information on auto provisioning Yealink IP phones, refer to

Yealink_SIP-T2

Series_T19(P) E2_T4_Series_CP860_W56P_IP_Phones_Auto_Provisioning_Guide