Manualshelf

User Manual

ManualsBrandsYealink ManualsOffice ElectronicsYealink SIP-T41S IP Phone 6-Line HD Voice + Wi-Fi USB Dongle WF40 + Power Supply
111112113114115116117118119120
Configuration Guide for User Access Level
117
Section
Header
Parameters and Default
Value
Configuration Items on the Handset
User Interface
[ GUI ]
Handset
De_reg_Handset = 0
OK->Settings->Registration->De-reg.
Handset
Select_Base = 0
OK->Settings->Registration->Select Base
Telephony = 0
OK->Settings->Telephony
Auto_Answer = 0
OK->Settings->Telephony->Auto Answer
Auto_Intercom = 0
OK->Settings->Telephony->Auto
Intercom
Default_Line = 0
OK->Settings->Telephony->Default Line
Incoming_Lines = 02
OK->Settings->Telephony->Incoming
Lines
Speed_Dial = 0
OK->Settings->Telephony->Speed Dial
Blacklist = 0
OK->Settings->Telephony->Caller
Blacklist
SystemSettings= 0
OK->Settings->System Settings
Network = 0
OK->Settings->System
Settings->Network
Handset_Reset = 0
OK->Settings->System
Settings->Handset Reset
Change_Base_PIN = 02
OK->Settings->System Settings->Change
Base PIN
Base_Reset_Local_Cfg = 02
OK->Settings->System Settings->Base
Reset
Base_Restart = 02
OK->Settings->System Settings->Base
Restart
Auto_Provision = 02
OK->Settings->System Settings->Auto
Provision
RPS = 02
OK->Settings->System Settings->RPS
Eco_Mode_Plus = 02
OK->Settings->System Settings->Eco
Mode+
Eco_Mode = 0
OK->Settings->System Settings->Eco
Mode
Repeater_Mode = 02
OK->Settings->System