User Manual

Configuration Guide for User Access Level
102
Section Header
Parameters and
Default Value
Configuration Items on the Phone User
Interface
[ GUI ]
to 1.)
SIP-T42G/T42S/T41P/T41S/T40P/T27P/T27
G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced
Settings->Reset Config->Reset local
settings (only appear when the parameter
“static.auto_provision.custom.protect” is set
to 1.)
ResetNonStaticConfig =
0
(not applicable to SIP
VP-T49G/CP860/W56P
IP phones)
SIP-T48G/T48S/T46G/T46S/T29G:
Menu->Advanced->Reset Config->Reset
non-static settings (only appear when the
parameter
“static.auto_provision.custom.protect” is set
to 1.)
SIP-T42G/T42S/T41P/T41S/T40P/T27P/T27
G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced
Settings->Reset Config->Reset non-static
settings (only appear when the parameter
“static.auto_provision.custom.protect” is set
to 1.)
ResetStaticConfig = 2
(not applicable to SIP
VP-T49G/CP860/W56P
IP phones)
SIP-T48G/T48S/T46G/T46S/T29G:
Menu->Advanced->Reset Config->Reset
static settings (only appear when the
parameter
“static.auto_provision.custom.protect” is set
to 1.)
SIP-T42G/T42S/T41P/T41S/T40P/T27P/T27
G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Reset
Config->Advanced Settings->Reset static
settings (only appear when the parameter
“static.auto_provision.custom.protect” is set
to 1.)
ResetUserDataUserCfg
= 0
(not applicable to SIP
VP-T49G/CP860/
Menu->Advanced->Reset Config->Reset
userdata & local config (only appear when
the parameter
“static.auto_provision.custom.protect” is set
to 1.)