User Manual

ManualsBrandsYealink ManualsOffice ElectronicsYealink SIP-T41S IP Phone 6-Line HD Voice + Wi-Fi USB Dongle WF40 + Power Supply

User Access Level of Web/Phone/Handset User

Interface

Overview

User access level feature is used to achieve different access levels for different authorized users.

It is useful for protecting the IP phone from unauthorized configuration, and popularly used for

the Hosted PBX solution. The following describes how to customize the access permission for

configurations on the web user interface and phone user interface.

This guide applies to the following Yealink IP phones:

 SIP VP-T49G, CP860 and W56P IP phones running firmware version 80 or later

 SIP-T48G, SIP-T48S, SIP-T46G, SIP-T46S, SIP-T42G, SIP-T42S, SIP-T41P, SIP-T41S, SIP-T40P,

SIP-T29G, SIP-T27P, SIP-T27G, SIP-T23P/G, SIP-T21(P) E2 and SIP-T19(P) E2 IP phones

running firmware version 81 or later

Scenario

For a Hosted PBX solution, IP phones are provided to customers for free but required a

minimum consumption monthly. All PBX services associated features on the deployed IP phones

are preconfigured to avoid customers from using other Hosted PBX’s service, and the Hosted

PBX system administrator can restrict the user access permission using user access level feature.

For example, the Hosted PBX system administrator restricts the write permission of the account

associated configurations. This means customers can only read these configurations on both

web user interface and phone user interface.

Introduction

Yealink SIP VP-T49G, SIP-T48G/S, SIP-T46G/S, SIP-T42G/S, SIP-T41P/S, SIP-T40P, SIP-T29G,

SIP-T27P/G, SIP-T23P/G, SIP-T21(P) E2, SIP-T19(P) E2, CP860 and W56P IP phones support

access levels of admin, var and user. The following describes the detailed information of each

access level:

 Admin: The administrator access level. With this access level, all configurations on both

web user interface and phone user interface can be read and written. The authentication

identity for this access level is admin. And the default password is admin.

 Var: The value-added reseller access level. Generally, with this access level, most

configurations on the web user interface and phone user interface can be read and written.

The authentication identity for this access level is var. And the default password is var.

Summary of content (187 pages)

PAGE 1
User Access Level of Web/Phone/Handset User Interface Overview User access level feature is used to achieve different access levels for different authorized users. It is useful for protecting the IP phone from unauthorized configuration, and popularly used for the Hosted PBX solution. The following describes how to customize the access permission for configurations on the web user interface and phone user interface.
PAGE 2
Configuration Guide for User Access Level  User: The end user access level. Generally, only a few configurations are allowed to be written and read for access user. The authentication identity for this access level is user. And the default password is user.
PAGE 3
Configuration Guide for User Access Level Results admin (2) var (1) user (0) 20 WR N N 21 WR N N 22 WR N N 23 R N N 30/31/32/33 N N N Values of X1X2 3
PAGE 4
Configuration Guide for User Access Level Application This section will introduce procedures to configure access permission of the web user interface in detail. The flow chart of configuring user access level is shown as below: Note: The boot file is only applicable to IP phones running firmware version 81 or later. The parameter varies from firmware version to firmware version (refer to Configuring Yealink IP Phones).
PAGE 5
Configuration Guide for User Access Level Customizing WebItemsLevel.cfg You can ask Yealink Field Application Engineer for the template file “WebItemsLevel.cfg”, or you can download it online: http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage. We recommend you only edit the desired configuration items in the supplied “WebItemsLevel.cfg" file, and keep other configuration items constant. WebItemsLevel.cfg downloaded via auto provisioning will override that in the phone flash.
PAGE 6
Configuration Guide for User Access Level According to the above configuration of access level, when logging in the web user interface with user access level, the web user interface displays as below: 6
PAGE 7
Configuration Guide for User Access Level When logging in the web user interface with var access level, the web user interface displays as below: 7
PAGE 8
Configuration Guide for User Access Level When logging in the web user interface with admin access level, the web user interface displays as below: Note: Configuration items for navigation bar are not writable on both web user interface and phone user interface. So, configuration items for navigation bar can be configured only using the format “ItemName = X”.
PAGE 9
Configuration Guide for User Access Level Main Page First Navigation Item Configuration Item Line Key (for SIP-T21(P) E2), Programable key (for SIP-T19(P) E2/CP860) Features Forward&DND features-forward Settings Preference settings-preference Directory Local Directory contacts-basic Security Password password For example, set the value of the configuration item “settings-preference” to be 1. When logging into with user access level, the access to the Settings web page will be denied.
PAGE 10
Configuration Guide for User Access Level sip_server = 2 sip_server2 = 2 outbound-proxy-server-port = 2 backup-outbound-proxy-server-port = 2 According to the above configuration of access level, when logging in the web user interface with user access level, the web user interface displays as below: When logging in the web user interface with var access level, the web user interface displays as below: 10
PAGE 11
Configuration Guide for User Access Level When logging in the web user interface with admin access level, the web user interface displays as below: For more information on parameters of the WebItemsLevel.cfg file, refer to Appendix-A： Configuration Parameters on page 23. For SIP VP-T49G/SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41P/T41S/T40P/T29G/T27P/T27G/T23 P/T23G/T21(P) E2/T19(P) E2/CP860 IP phones: The following shows configuration segments for the phone user interface in the WebItemsLevel.
PAGE 12
Configuration Guide for User Access Level Example1: Configuration items in the WebItemsLevel.cfg for call forward menu and its submenu settings: [ GUI ] callcontrol_forward = 02 always-forward = 10 busy-forward = 00 NoAnswer-forward = 00 Note: The configuration of busy forward is the same as the one of the no answer forward, so the following figures take busy forward as an example.
PAGE 13
Configuration Guide for User Access Level Always forward submenu is read-only for var access level: Busy forward/no answer forward submenu is read-only for var access level: When logging in to the phone user interface with admin access level, the phone user interface displays as below: Always forward submenu is writable for admin access level: 13
PAGE 14
Configuration Guide for User Access Level Busy forward/no answer forward submenu is writable for admin access level: Example2: Configuration items in the WebItemsLevel.
PAGE 15
Configuration Guide for User Access Level No answer forward submenu is writable for user access level: When logging in to the phone user interface with var access level, the access permission of each submenu is displayed as below: Always forward submenu is writable for var access level: Busy forward submenu is read-only for var access level: 15
PAGE 16
Configuration Guide for User Access Level No answer forward submenu is writable for var access level: When logging in to the phone user interface with admin access level, the phone user interface displays as below: Always forward submenu is writable for admin access level: Busy forward submenu is writable for admin access level: 16
PAGE 17
Configuration Guide for User Access Level No answer forward submenu is writable for admin access level: For W56P IP DECT phones: The following shows configuration segments for the handset user interface in the WebItemsLevel.cfg file for reference: If you set the access permission of the high level, it will have an impact on that of the low level. In the following examples, the Settings menu has a higher level than other submenus. Example: Configuration items in the WebItemsLevel.
PAGE 18
Configuration Guide for User Access Level Configuring Yealink IP Phones User access level feature is disabled for Yealink W56P/SIP VP-T49G/SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41P/T41S/T40P/T29G/T27P/T27G/T23P/T23G /T21(P) E2/T19(P) E2/CP860 IP phones in neutral firmware version by default. Before using this feature, you need to enable it through auto provisioning introduced as following. User access level feature is configurable only via configuration files.
PAGE 19
Configuration Guide for User Access Level Parameters Permitted Values Default None Phone User Interface: None web_item_level.url FTP, TFTP, HTTP or HTTPS download URL Blank Description: This parameter is used to configure the access URL of the WebItemsLevel.cfg file. Note: It takes effect after reboot. Web User Interface: None Phone User Interface: None The parameter settings in the configuration file for reference are shown as below: security.var_enable = 1 web_item_level.url = ftp://192.168.1.
PAGE 20
Configuration Guide for User Access Level To configure user access level feature for Yealink IP phones: 1. Edit the following parameters in the configuration file (e.g., features.cfg). Parameters static.security.var_enable Permitted Values Default 0 or 1 0 Description: This parameter is used to enable or disable the login of the web/phone user interface with different access levels. 0-Disabled 1-Enabled Note: It takes effect after reboot. Web User Interface: None Phone User Interface: None static.
PAGE 21
Configuration Guide for User Access Level Parameters Permitted Values Default HTTPS download URL Description: This parameter is used to configure the access URL of the WebItemsLevel.cfg file. Note: It takes effect after reboot. Web User Interface: None Phone User Interface: None The parameter settings in the configuration file for reference are shown as below: static.security.var_enable = 1 static.web_item_level.url = ftp://192.168.1.100/WebItemsLevel.cfg static.security.default_access_level = 1 2.
PAGE 22
Configuration Guide for User Access Level When logging in with different access levels, you can see different permissions of web user interface. To login the phone user interface with different access levels: 1. Press Menu->UserMode. 2. Press or , or the Switch soft key to select the desired access level in the User Type field. 3. Enter the password in the Password field. 4. Press the Save soft key to accept the change.
PAGE 23
Appendix-A Configuration Parameters Configuration Parameters of Web User Interface The following table lists configuration items in the WebItemsLevel.
PAGE 24
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface Status->IPv6 IPv6 = 0 (not applicable to W56P IP DECT phones) Status->Network Common NetworkCommon = 0 [ Status ] Status->Account Status AccountStatus = 0 (not applicable to W56P IP DECT phones) Status->Ext For SIP-T29G and SIP-T27P/G: Ext = 0 (only applicable to SIP-T48G/T48S/T46G/ T46S/T29G/T27P/ For SIP-T48G/S and SIP-T46G/S: T27G IP phones) [ Status-VoIP ] re
PAGE 25
Configuration Guide for User Access Level Section Header (only applicable to W56P IP DECT phones) Parameters and Configuration Items on the Web User Default Value Interface 0 registered-new-hands et = 0 Status->Register New Handsets voip-status = 0 Status->Paging Status Paging = 0 Status->VoIP Status Status->RTP Status [ RTP-Status ] (only applicable to SIP VP-T49G IP rtcp-status = 11 phones) Status->Talk Statistics [ Talk-Stats ] (only applicable to SIP VP-T49G IP talk-stats = 0 phones) a
PAGE 26
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface account-direct = 0 (only applicable to SIP Account->SIP IP Call (the whole page) VP-T49G IP phones) switch-account = 0 (not applicable to SIP-T19(P) E2/CP860 Account->Register->Account IP phones) account_status = 0 Account->Register->Register Status line_active = 0 Account->Register->Line Active account_label = 0 Account->Register->Label display_name = 0 Accoun
PAGE 27
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface outbound-proxy-serv er-port = 2 (not applicable to SIP VP-T49G/CP860/ Account->Register->Outbound Proxy Server 1->Port W56P IP phones) SIP VP-T49G/CP860/W56P: Account->Register->Outbound Proxy Server 2 backup-outbound-pr oxy-server = 2 Account->Register->Outbound Proxy Server 2->Port (01 for SIP VP-T49G/CP860/ W56P IP phones) SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41 P/T
PAGE 28
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface Account->Register->NAT Account->SIP IP Call->NAT SIP VP-T49G/CP860/W56P: Account->Register->SIP Server 1/2 sip_server = 2 [ Account-Register SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41 P/T41S/T40P/T29G/T27P/T27G/T23P/T23G/ ] T21(P) E2/T19(P) E2: Account->Register->SIP Server 1 sip_server2 = 2 Account->Register->SIP Server 2 (not applicable to SIP VP-T49G/CP860/ W56P IP ph
PAGE 29
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface version only) anonymous_call_OnC ode = 1 Account->Basic->Send Anonymous (for neutral firmware Code->On Code version only) anonymous_call_OffC ode = 1 Account->Basic->Send Anonymous (for neutral firmware Code->Off Code version only) send_anonymous_reje ction_code = 0 Account->Basic->Send Anonymous (for neutral firmware Rejection Code version only) anonymous_rej
PAGE 30
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface phones) switch-account = 0 (not applicable to SIP-T19(P) E2/CP860 Account->Codec->Account IP phones) Account->Codec->Audio Codecs SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41 P/T41S/T40P/T29G/T27P/T27G/T23P/T23G/ T21(P) E2/T19(P) E2/CP860: SIP VP-T49G: [ Account-Codec ] codecs-group = 0 W56P: switch-account = 0 [ Account-Adv ] (not applicable to Account->Advanced->Accoun
PAGE 31
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface IP phones) UDP_keep-alive = 2 (only applicable to SIP VP-T49G/CP860/ W56P IP phones) Account->Advanced->Keep Alive Type Account->Advanced->Keep Alive Interval(Seconds) udp-keep-alive-type =2 (not applicable to SIP Account->Advanced->Keep Alive Type VP-T49G/CP860/ W56P IP phones) udp-keep-alive-interv al = 2 (not applicable to SIP VP-T49G/CP860/ Account->Advanced->Kee
PAGE 32
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface n=2 subscribe-register = 2 Account->Advanced->Subscribe Register Account->Advanced->Subscribe for MWI Account->Advanced->MWI Subscription MWI-items = 2 Period(Seconds) Account->Advanced->Subscribe MWI To Voice Mail voice_mail = 2 (0 for SIP VP-T49G/CP860/ Account->Advanced->Voice Mail W56P IP phones) [ Account-Adv ] voice_mail_display = 2 (not applicable to W56P IP
PAGE 33
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface SIP-T19(P) E2/ CP860/W56P IP phones) BlfListCode = 2 (not applicable to SIP-T19(P) E2/ Account->Advanced->BLF List Pickup Code CP860/W56P IP phones) BLFListBargeInCode = 2 (not applicable to Account->Advanced->BLF List Barge In SIP-T19(P) E2/ Code CP860/W56P IP phones) BLF-List-Retrieve-Cod e=2 [ Account-Adv ] (not applicable to Account->Advanced->BLF List Retriev
PAGE 34
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface BLA-subscription-peri od = 2 (not applicable to W56P/SIP VP-T49G IP Account->Advanced->BLA Subscription Period phones) SIP-send-MAC = 2 Account->Advanced->SIP Send MAC SIP-send-line = 2 Account->Advanced->SIP Send Line SIP-Reg-retry-timer = Account->Advanced->SIP Registration 2 Retry Timer(0~1800s) conference-type = 2 Account->Advanced->Conference Type confere
PAGE 35
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface Distinctive-Ring-Tone s=2 (not applicable to W56P IP DECT Account->Advanced->Distinctive Ring Tones phones) UnregisterOnReboot Account->Advanced->Unregister When =2 Reboot Out-Dialog-BLF = 2 (not applicable to SIP-T19(P) E2/ Account->Advanced->Out Dialog BLF CP860/W56P IP phones) RTCP-Collector-Name =2 (not applicable to [ Account-Adv ] W56P IP DECT Account->Adv
PAGE 36
Configuration Guide for User Access Level Section Header W56P IP DECT phones) Parameters and Configuration Items on the Web User Default Value Interface outgoing-lines =0 Account->Number Assignment->Outgoing lines [ Account-Handse tname ] (only applicable to Handsetname = 1 Account->Handset Name network-basic = 0 Network->Basic (the whole page) W56P IP DECT phones) network-pcport = 0 (not applicable to CP860/W56P IP Network->PC Port (the whole page) phones) network-nat = 2 (not applicable to
PAGE 37
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface Network->Basic->IPv4 Config ipv4config = 0 (2 for SIP VP-T49G/CP860/ W56P IP phones) [ Network-Basic ] Network->Basic->IPv6 Config ipv6config = 0 (2 for SIP VP-T49G/CP860 IP phones; not applicable to W56P IP DECT phones) wan-ppoe = 2 (only applicable to VP SIP-T49G/W56P IP phones) pcport-active = 0 [ Network-PCPort (not applicable to ] CP860/W56P IP Network->Basic-
PAGE 38
Configuration Guide for User Access Level Section Header [ Network-Nat ] Parameters and Configuration Items on the Web User Default Value Interface STUN-switch = 2 Network->NAT->STUN->Active STUN-server = 2 Network->NAT->STUN->STUN Server STUN-port = 2 (not applicable to W56P IP phones) (1024~65000) Network->NAT->TURN SIP VP-T49G/CP860/ Network->NAT->STUN->STUN Port TURN = 2 TURN-switch = 2 Network->NAT->TURN->Active TURN-server = 2 Network->NAT->TURN->TURN Server TURN-port = 2 Networ
PAGE 39
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface VP-T49G/CP860/ W56P IP phones) port-link = 2 Network->Advanced->Port Link (not applicable to W56P IP DECT phones) Network->Advanced->Voice QoS W56P/CP860/SIP-T48G/T48S/T46G/T46S/ T42G/T42S/T41P/T41S/T40P/T29G/T27P/ T27G/T23P/T23G/T21(P) E2/T19(P) E2: voice-QoS = 2 SIP VP-T49G: [ Network-Advanc ed ] reserve-port = 0 Network->Advanced->Reserved Port (only applicable
PAGE 40
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface SIP-T48G/T48S/T46G/T46S/T42G/T42S/ T41P/T41S/T40P/T29G/T27P/T27G/T23P/ T23G/T21(P) E2/T19(P) E2: span-to-pc-port = 2 (not applicable to Network->Advanced->Span to PC CP860/W56P IP phones) [ Network-Advanc ed ] Network->Advanced->Registration reg-surge-prev = 2 Random ICMPv6_Status =2 (only applicable to SIP Network->Advanced->ICMPv6 Status VP-T49G/SIP-T48G/ T48S/T4
PAGE 41
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface VP-T49G/SIP-T48G/ T48S/T46G/T46S/ T29G IP phones) wifi-label = 0 (only applicable to SIP-T48G/T48S/T46G/ Network->Wi-Fi->Profile Name T46S/T29G IP phones) wifi-ssid = 0 (only applicable to SIP-T48G/T48S/T46G/ Network->Wi-Fi->SSID T46S/T29G IP phones) wifi-mode = 0 (only applicable to SIP-T48G/T48S/T46G/ Network->Wi-Fi->Security Mode T46S/T29G IP phones) [Network-Wif
PAGE 42
Configuration Guide for User Access Level Section Header phones) Parameters and Configuration Items on the Web User Default Value Interface IP phones) programmablekey = 0 Dsskey->Programable Key (the whole page) extkey = 0 (only applicable to SIP-T48G/T48S/T46G/ Dsskey->Ext Key (the whole page) T46S/T29G/T27P/ T27G IP phones) Dsskey->Line Key (for all the line keys on each page) line-key = 0 [ LineKey ] (not applicable to SIP-T19(P) E2/ CP860/W56P IP phones) Enable-Page-Tips = 0 (only applicabl
PAGE 43
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface SIP-T48G/T48S/ T46G/T46S/T29G/ T27P/T27G IP phones) features-forward = 0 features-general = 0 features-audio = 0 Features->Forward&DND (the whole page) Features->General Information (the whole page) Features->Audio (the whole page) features-intercom = 0 (not applicable to W56P IP DECT Features->Intercom (the whole page) phones) features-transfer = 0 features-callpick
PAGE 44
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface features-actionurl = 2 (0 for SIP VP-T49G/CP860 IP phones; not Features->Action URL (the whole page) applicable to W56P IP DECT phones) features-bluetooth = 0 [ Features ] (only applicable to SIP VP-T49G/SIP-T48G/ Features->Bluetooth (the whole page) T48S/T46G/T46S/ T29G IP phones) features-powerled = 0 (not applicable to Features->Power LED (the whole page) CP860
PAGE 45
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface (not applicable to ->Account SIP-T19(P) E2/CP860 IP phones) Features->Forward&DND->Always Forward always-forward = 0 always-forward-enabl Features->Forward&DND->Forward->Alwa ed = 0 ys Forward->On/Off always-forward-target Features->Forward&DND->Forward->Alwa =0 ys Forward->Target always-forward-OnCo de = 0 Features->Forward&DND->Forward->Alwa (for neutral fi
PAGE 46
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface version only) Features->Forward&DND->No Answer Forward NoAnswer-forward = 0 NoAnswer-forward-e Features->Forward&DND->Forward->No nabled = 0 Answer Forward->On/Off NoAnswer-forward-ri Features->Forward&DND->Forward->No ngtimes = 0 Answer Forward->After Ring Time (0~120s) NoAnswer-forward-ta Features->Forward&DND->Forward->No rget = 0 Answer Forward->Target No
PAGE 47
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface W56P IP DECT phones) DND-mode = 0 (01 for SIP VP-T49G/CP860/ W56P IP phones; not Features->Forward&DND->DND->Mode applicable to SIP-T19(P) E2/CP860 IP phones) DND-account = 0 (01 for SIP VP-T49G/CP860/ W56P IP phones; not applicable to Features->Forward&DND->DND->Accoun t SIP-T19(P) E2/CP860 IP phones) [ Forward&DND ] DND-Status = 0 (01 for SIP Features->Forward&DND
PAGE 48
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface Features->General Information->Call Waiting Off Code (for neutral firmware version only) auto-redial = 0 (not applicable to Features->General Information->Auto W56P IP DECT Redial phones) auto_redial_interval = 0 (not applicable to W56P IP DECT Features->General Information->Auto Redial Interval(1~300s) phones) auto_redial_times = 0 (not applicable to Features->Gen
PAGE 49
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface W56P IP DECT phones) feature-key-synchroni Features->General Information->Feature sation = 0 Key Synchronization TimeOut-for-DialNow Features->General Information->Time Out =0 for Dial Now Rule RFC-2543-Hold = 2 Features->General Information->RFC 2543 Hold use-outbound-in-dial Features->General Information->Use og = 2 Outbound Proxy In Dialog IsDeal-180 = 2
PAGE 50
Configuration Guide for User Access Level Parameters and Configuration Items on the Web User Default Value Interface SuppressDTMFDisplay Features->General Information->Suppress =1 DTMF Display SuppressDTMFDisplay Features->General Information->Suppress Delay = 1 DTMF Display Delay Section Header play-local-DTMF-tone =0 (not applicable to W56P IP DECT Features->General Information->Play Local DTMF Tone phones) DTMFRepetition = 0 (not applicable to Features->General Information->DTMF W56P IP
PAGE 51
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface AutoAnswerDelay = 0 (not applicable to Features->General Information->Auto W56P IP DECT Answer Delay(1~4s) phones) enable-auto-answer-t one = 0 (not applicable to W56P IP DECT Features->General Information->Enable Auto Answer Tone phones) HeadsetPrior = 0 (not applicable to Features->General Information->Headset CP860/W56P IP Prior phones) DTMFReplaceTran = 0 (n
PAGE 52
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface blf-led-mode = 0 (not applicable to W56P/SIP VP-T49G/SIP-T19(P) Features->General Information->BLF LED Mode E2/CP860 IP phones) ReLogOffTime = 2 call-number-filter = 0 Features->General Information->Auto Logout Time(1~1000min) Features->General Information->Call Number Filter Use_Logo = 0 (not applicable to W56P/SIP VP-T49G/SIP-T48G/ Features->General Information->U
PAGE 53
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface Account->SIP IP Call->IP Direct Auto Answer calllog-show-num = 0 (not applicable to Features->General Information->Call List W56P IP DECT Show Number phones) voicemail-tone = 0 DHCP-hostname = 0 reboot-in-talking = 0 Features->General Information->Voice Mail Tone Features->General Information->DHCP Hostname Features->General Information->Reboot In Talking Hide-Fea
PAGE 54
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface button-sound = 0 (not applicable to W56P IP DECT Features->Audio->Key Tone phones) send-sound = 0 (not applicable to W56P IP DECT Features->Audio->Send Tone phones) redial_tone = 0 (not applicable to W56P IP DECT Features->Audio->Redial Tone phones) headset-send-volume =1 (not applicable to CP860/W56P IP Features->Audio->Headset Send Volume (-50~50) phones) [ Feat
PAGE 55
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface semi-attend-transfer Features->Transfer->Semi-Attended =0 Transfer blind-tran-onhook = Features->Transfer->Blind Transfer On 0 Hook Semi-Attend-Trans-O Features->Transfer->Attended Transfer On nHook = 0 Hook transfer-on-conferenc [ Features-Transfer ] e-hang-up = 0 (not applicable to W56P IP DECT Features->Transfer->Transfer on Conference Hang up phones) Tr
PAGE 56
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface VP-T49G/CP860/ W56P IP phones) ActionURILimitIP = 2 Features->Remote Control->Action URI Allow IP List CSTAControl = 2 (not applicable to SIP VP-T49G/CP860/ Features->Remote Control->CSTA Control W56P IP phones) Lock_Enable = 0 (2 for SIP VP-T49G/CP860 IP Features->Phone Lock->Phone Lock Enable phones) keyboard_lock = 0 (2 for SIP VP-T49G/CP860 IP Features->Phone L
PAGE 57
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface (only applicable to SIP VP-T49G IP phones) [ Features-ActionU RL ] (not applicable to W56P IP DECT phones) setup-complete = 2 Features->Action URL->Setup Completed log-on = 2 Features->Action URL->Registered log-off = 2 Features->Action URL->Unregistered register-fail = 2 Features->Action URL->Register Failed off-hook = 2 Features->Action URL->Off Hook on-hook
PAGE 58
Configuration Guide for User Access Level Section Header [ Features-ActionU RL ] (not applicable to W56P IP DECT phones) Parameters and Configuration Items on the Web User Default Value Interface Hold = 2 Features->Action URL->Hold Unhold = 2 Features->Action URL->UnHold Mute = 2 Features->Action URL->Mute Unmute = 2 Features->Action URL->UnMute Missed-call = 2 Features->Action URL->Missed Call IPChange = 2 Features->Action URL->IP Changed IdletoBusy = 2 Features->Action URL->Idle To Bus
PAGE 59
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface RemoteBusy = 2 Features->Action URL->Remote Busy CallRemoteCanceled Features->Action URL->Call Remote =2 Canceled bluetooth-active = 0 [ Features-Bluetoo th ] (only applicable to SIP VP-T49G/SIP-T48G/ Features->Bluetooth->Bluetooth Active T48S/T46G/T46S/ T29G IP phones) common-power-light Features->Power LED->Common Power -on = 0 Light On ring-power-light-fla
PAGE 60
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface phones) [ Features-PowerL ED ] misscall-power-light-f lash = 0 (not applicable to (not applicable to SIP CP860 IP phones) VP-T49G/CP860/W56 Features->Power LED->MissCall Power Light Flash P IP phones) [ Features-NotifyP op ] (not applicable to W56P IP DECT phones) Display-Voice-Mail-P Features->Notification Popups->Display opup = 0 Voice Mail Popup Display-Mi
PAGE 61
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface (1 for SIP VP-T49G/CP860 IP phones; not applicable to W56P IP DECT phones) settings-tones = 2 (0 for SIP VP-T49G/CP860/ Settings->Tones (the whole page) W56P IP phones) settings-softkey = 2 (not applicable to W56P IP DECT Settings->Softkey Layout (the whole page) phones) [ Settings ] settings-tr069 = 2 Settings->TR069 (the whole page) settings-voicemonitor ing = 2
PAGE 62
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface VP-T49G IP phones) SIP VP-T49G/CP860/W56P: Settings->Preference->Language SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41 web-language = 0 P/T41S/T40P/T29G/T27P/T27G/T23P/T23G/ T21(P) E2/T19(P) E2: live-dialpad = 0 (not applicable to W56P IP DECT Settings->Preference->Live Dialpad phones) inter-digit-time = 0 [ Settings-Preferen ce ] (not applicable to Settings->Preference->I
PAGE 63
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface CP860/SIP-T40P/T27P /T27G/T23P/T23G/ T21(P) E2/T19(P) E2 IP phones) watchdog = 2 Settings->Preference->Watch Dog ring_type_setting = 0 (not applicable to Settings->Preference->Ring Type W56P IP DECT Settings->Preference->Upload Ringtone phones) Wallpaper = 0 (only applicable to SIP VP-T49G/SIP-T48G/ T48S/T46G/T46S/ T29G IP phones) Settings->Preference->Wallpaper Se
PAGE 64
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface Time location = 0 Settings->Time & Date->Location time_type = 0 Settings->Time & Date->Fixed Type daylight_date = 0 offset = 0 NTP_priority = 0 Settings->Time & Date->Start Date Settings->Time & Date->End Date Settings->Time & Date->Offset(minutes) Settings->Time & Date->NTP by DHCP Priority SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41 P/T41S/T40P/T29G/T27P/T27G/T23P/T23G/
PAGE 65
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface [ Settings-CallDisp T48S/T46G/T46S/ lay ] T29G IP phones) Incoming-Call-Ringer- Settings->Call Display->Display Called Animation = 0 Party Information Call-Display-Method Settings->Call Display->Call Information =0 Display Method Settings->Upgrade->Version version_info = 0 SIP VP-T49G/CP860/W56P: reset_to_factory = 2 (1 for SIP VP-T49G/CP860/ W56P IP phones)
PAGE 66
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface reset_userdata = 0 (not applicable to SIP VP-T49G/CP860/ W56P IP phones) Settings->Upgrade->Reset userdata & local config (only appear when the parameter “static.auto_provision.custom.protect” is set to 1.) reset_local_config = 0 Settings->Upgrade->Reset Local (only applicable to SIP Configuration (only appear when the VP-T49G/CP860/ parameter “auto_provision.
PAGE 67
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface =2 common-AES-key = 2 Expired Time(s) Settings->Auto Provision->Common AES Key MAC-Oriented-AES-k Settings->Auto Provision->MAC-Oriented ey = 2 AES Key zero_active = 2 (not applicable to W56P IP DECT Settings->Auto Provision->Zero Active phones) wait_time = 2 (not applicable to Settings->Auto Provision->Wait W56P IP DECT Time(1~100s) Settings-AutoProv phones)
PAGE 68
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface flexible-switch = 2 [ Settings-AutoPro vision ] (not applicable to SIP Settings->Auto Provision->Flexible Auto VP-T49G/CP860/ Provision W56P IP phones) flexible-interval = 2 (not applicable to SIP Settings->Auto Provision->Flexible Interval VP-T49G/CP860/ Days W56P IP phones) flexible-autoptime = 2 (not applicable to SIP VP-T49G/CP860/ Settings->Auto Provision-
PAGE 69
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface W56P IP phones) import-cfg-config-file =0 (2 for SIP VP-T49G/CP860/ Settings->Configuration->Import CFG Configuration File W56P IP phones) Settings->Configuration->Pcap Feature Settings->Configuration->Packet Capture Count (only applicable to SIP VP-T49G IP phones) pcap_trace = 0 Settings->Configuration->Packet Capture (1 for SIP Clip Bytes (only applicable to SIP VP
PAGE 70
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface (not applicable to SIP Logging->Local Log Level VP-T49G/CP860/ W56P IP phones) Local_Log_Max_File_Si ze = 0 (not applicable to SIP VP-T49G/CP860/ Settings->Configuration->Local Logging->Max Log File Size (1024-2048KB) W56P IP phones) Local_Log_Export = 0 (not applicable to SIP Settings->Configuration->Local VP-T49G/CP860/ Logging->Export Local Log W56P IP phones)
PAGE 71
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface (not applicable to SIP VP-T49G/CP860/ W56P IP phones) [ Settings-Config ] ExportAllDiagnosticFil es = 2 (not applicable to SIP VP-T49G/CP860/ Settings->Configuration->Export All Diagnostic Files W56P IP phones) replace-rule = 0 dial-now = 0 area-code = 0 block-out = 0 Settings->Dial Plan->Replace Rule (the whole page) Settings->Dial Plan->Dial Now (the whole page)
PAGE 72
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface [ Settings-DialPlan Settings->Dial Plan->Block Out->Account ] (not applicable to SIP-T19(P) E2/CP860 IP phones) echo-cancellation = 2 Settings->Voice->Echo Cancellation (0 for SIP VP-T49G/CP860/ W56P IP phones) [ Settings-Voice ] jitter-buffer = 2 Settings->Voice->JITTER BUFFER (0 for SIP VP-T49G/CP860/ W56P IP phones) [ Settings-Ring ] personal-ring = 2 (not ap
PAGE 73
Configuration Guide for User Access Level Section Header [ Settings-Tones ] Parameters and Configuration Items on the Web User Default Value Interface VP-T49G/CP860/ W56P IP phones) Custom_SoftKey = 2 SoftKey_Type = 2 Settings->Softkey Layout->Custom Softkey Settings->Softkey Layout->Call States Settings->Softkey Layout-> [ Softkey ] (not applicable to W56P IP DECT phones) [ TR069 ] SoftKey_Select = 2 head = 2 Settings->TR069-> EnableTR069 = 2 Settings->TR069->Enable TR069 ACSUsername = 2 S
PAGE 74
Configuration Guide for User Access Level Section Header [ Settings-VoiceM onitoring ] Parameters and Configuration Items on the Web User Default Value Interface RTCP-Critical-Moslq = Settings->Voice Monitoring->Critical 2 threshold for Moslq RTCP-Warning-Delay Settings->Voice Monitoring->Warning =2 threshold for Delay RTCP-Critical-Delay = Settings->Voice Monitoring->Critical 2 threshold for Delay Display-VQReport-On Settings->Voice Monitoring->Display -Web = 2 Report options on Web
PAGE 75
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface “camera.
PAGE 76
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface office_Tuesday = 0 (2 for SIP VP-T49G IP Settings->Power Saving->Tuesday phones) office_Wednesday = 0 (2 for SIP VP-T49G IP Settings->Power Saving->Wednesday phones) office_Thursday = 0 (2 for SIP VP-T49G IP Settings->Power Saving->Thursday phones) office_Friday = 0 (2 for SIP VP-T49G IP Settings->Power Saving->Friday phones) office_Saturday = 0 (2 for SIP VP-T49G
PAGE 77
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface contacts-basic = 0 Directory->Local Directory (the whole page) contacts-remote = 1 (0 for SIP Directory->Remote Phone Book (the whole VP-T49G/CP860/ page) W56P IP phones) contacts-callinfo = 0 (not applicable to Directory->Phone Call Info (the whole W56P IP DECT page) phones) [ Contacts ] contacts-LDAP = 1 (0 for SIP VP-T49G/CP860/ W56P IP phones; not Director
PAGE 78
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface Directory->Local Directory-> all-contacts-control = [ LocalPhoneBook 0 ] (not applicable to W56P IP DECT phones) Directory->Local Directory->Import Local import-export-contac Directory File ts = 0 (1 for SIP VP-T49G/CP860/ W56P IP phones) btnImportCSV = 0 (1 for SIP VP-T49G/CP860/ Directory->Local Directory-> W56P IP phones) btnExportCSV = 0 (1 for SIP VP-T49G/CP
PAGE 79
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface Directory->Local Directory-> [ LocalPhoneBook ] (not applicable to W56P IP DECT opt-contacts = 0 phones) remote-phonebook-li Directory->Remote Phone Book-> st = 1 (0 for SIP VP-T49G/CP860/ W56P IP phones) SRemoteNameEnable [ Contacts-Remote ] =1 (0 for SIP VP-T49G/CP860/ Directory->Remote Phone Book->Incoming/Outgoing Call Lookup W56P IP phones) SRemoteNameFlashTi
PAGE 80
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface phones) dialed-list = 0 Directory->Phone Call Info-> (not applicable to SIP VP-T49G/CP860 IP phones) missed-list-title = 0 (only applicable to SIP VP-T49G/CP860 IP Directory->Phone Call Info-> phones) missed-list-content = 0 Directory->Phone Call Info->Missed List (only applicable to SIP VP-T49G/CP860 IP phones) [ PhoneCallInfo ] (not applicable to W56P IP DECT phon
PAGE 81
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface phones) forwarded-list-conten t=0 [ PhoneCallInfo ] (only applicable to SIP (not applicable to VP-T49G/CP860 IP W56P IP DECT phones) Directory->Phone Call Info->Forwarded List phones) forwarded-list = 0 Directory->Phone Call Info-> (not applicable to SIP VP-T49G/CP860 IP phones) enable-LDAP = 0 Directory->LDAP->Enable LDAP LDAP-name-filter = 0 Directory->LDAP->
PAGE 82
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface =0 Receive_Priority = 1 (0 for SIP VP-T49G/CP860 IP Directory->Multicast IP->Paging Barge phones) PagePriorityActive = 1 (0 for SIP Directory->Multicast IP->Paging Priority VP-T49G/CP860 IP Active phones) Directory->Multicast IP-> [ MulticastIP ] (not applicable to W56P IP DECT phones) MulticastIPConfig = 1 (0 for SIP VP-T49G/CP860 IP phones) Directory->Multicast
PAGE 83
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface [ Contacts-Favorit e] Directory->Setting->Recent Call In Dialing password = 0 trusted_cert = 2 [ Security ] server_cert = 2 Security->Password (the whole page) Security->Trusted Certificates (the whole page) Security->Server Certificates (the whole page) base-pin = 0 (only applicable to W56P IP DECT Security->Base PIN (the whole page) phones) Security->Password-> s
PAGE 84
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface Security->Trusted Certificates->Import [ TrustCerts ] upload-trust-certs = 2 server-certs-records = Trusted Certificates Security->Server Certificates 2 server-certs-device-ce [ ServerCerts ] rt = 2 Security->Server Certificates->Device Certificates Security->Server Certificates->Import server-certs-upload = Server Certificates 2 [ BasePin ] (only applicable t
PAGE 85
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface (1 for SIP VP-T49G IP phones; only applicable to SIP VP-T49G/SIP-T48G/ T48S/T46G/T46S/ T29G IP phones) remote_pcap_switch =2 Hidden->Remote Pcap (only applicable to Hidden->Remote Pcap Port SIP-T48G/T48S/T46G/ Hidden->Remote Pcap Password T46S/T29G IP phones) remote_pcap = 2 (only applicable to [ HiddenSetting ] SIP-T48G/T48S/T46G/ Hidden->Remote Pcap T46S/T29G I
PAGE 86
Configuration Guide for User Access Level Section Header ion ] Parameters and Configuration Items on the Web User Default Value Interface (only applicable to SIP Auto Favorite VP-T49G/SIP-T48G/ T48S/T46G/T46S/T29G IP phones) [ Contacts ] (only applicable to contacts-broadsoft = 0 SIP VP-T49G/CP860/ Directory->Network Directory (the whole page) W56P IP phones) Directory->Network Directory->Network Directory Directory->Network Directory->Custom Directory Directory->Network Directory->Call Log Dire
PAGE 87
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Web User Default Value Interface Applications->Broadsoft XSI->Network Directory Applications->Broadsoft XSI->Custom Directory [ Broadsoft ] Directotries = 1 (not applicable to SIP VP-T49G/CP860/ W56P IP phones) CallLog = 1 Applications->Broadsoft XSI->Call Log Applications->Broadsoft XMPP->XMPP Account XMPP-accout = 1 XMPP-userame = 1 XMPP-password = 1 Applications->Broadsoft XMPP->XMPP UserName
PAGE 88
Configuration Guide for User Access Level Configuration Parameters of Phone User Interface The following table lists configuration items in the WebItemsLevel.
PAGE 89
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface Status_More = 0 (01 for CP860/W56P IP phones; not applicable to SIP Menu->Status->More VP-T49G/SIP-T48G/ T48S IP phones) SIP VP-T49G/SIP-T48G/T48S: Menu->Status->Network network = 0 SIP-T46G/T46S/T42G/T42S/T41P/T41S/T40 P/T29G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP860: Menu->Status->More->Network SIP VP-T49G/SIP-T48G/T48S: Menu->Status->Phone Status_More_Phone =
PAGE 90
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface T48S IP phones) features = 0 (02 for SIP VP-T49G/CP860/ Menu->Features W56P IP phones) callcontrol_forward = 1 (11 for SIP VP-T49G/CP860/ Menu->Features->Call Forward W56P IP phones) always-forward = 0 (1 for SIP Menu->Features->Call Forward->Always VP-T49G/CP860/ Forward W56P IP phones) busy-forward = 0 [ GUI ] (1 for SIP Menu->Features->Call Forward->Busy V
PAGE 91
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface SIP VP-T49G/SIP-T48G/T48S: Menu->Features->General->Key As Send key_as_send= 0 SIP-T46G/T46S/T29G: (12 for SIP Menu->Features->Others->General->Key VP-T49G/CP860/ As Send W56P IP phones) SIP-T42G/T42S/T41P/T41S/T40P/T27P/T27 G/T23P/T23G/T21(P) E2/T19(P) E2/CP860: Menu->Features->Key As Send SIP VP-T49G/SIP-T48G/T48S: Menu->Features->Hot Line->Hotline Number hotl
PAGE 92
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface (not applicable to SIP >Ping VP-T49G/CP860/W56P IP phones) Diagnostics_TraceRoute =0 (not applicable to SIP VP-T49G/CP860/W56P Menu->Features->Diagnostics->Network>Trace Route IP phones) SIP Features_AutoRD = 0 (1 for SIP VP-T49G/CP860/ W56P IP phones) VP-T49G/SIP-T48G/T48S/T42G/T42S/T41P/ T41S/T40P/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP860: Menu->Features->Aut
PAGE 93
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface SIP multpaginglist = 2 (10 for SIP VP-T49G/CP860/ W56P IP phones) VP-T49G/SIP-T48G/T48S/T42G/T42S/T41P/ T41S/T40P/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP860: Menu->Features->Paging List SIP-T46G/T46S/T29G: Menu->Features->Others->Paging List Main_Settings=0 (not applicable to SIP VP-T49G/SIP-T48G/ Menu->Settings T48S/T46G/T46S/T29G IP phones) SIP VP-T49G/SIP-T48G
PAGE 94
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface VP-T49G/CP860/ Menu->Basic->Display W56P IP phones) SIP-T42G/T42S/T41P/T41S/T40P/T27P/ T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP860: Menu->Settings->Basic Settings->Display SIP sound = 0 (1 for SIP VP-T49G/CP860/ W56P IP phones) VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G: Menu->Basic->Sound SIP-T42G/T42S/T41P/T41S/T40P/T27P/ T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP860: Menu->Se
PAGE 95
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface Menu->Settings->Basic Settings->Change PIN SIP-T48G/T48S/T46G/T46S/T29G: check_key_guard_lock = 0 (not applicable to SIP VP-T49G/CP860/W56P IP phones) Menu->Basic->Phone Lock SIP-T42G/T42S/T41P/T41S/T40P/T27P/T27 G/T23P/T23G/T21(P) E2/T19(P) E2: Menu->Settings->Basic Settings->Phone Lock bluetooth = 0 (1 for SIP VP-T49G IP phones; only applicable to Menu->Basic->Blue
PAGE 96
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface X->Display Name SIP-T42G/T42S/T41P/T41S/T40P/T27P/T27 G/T23P/T23G/T21(P) E2/T19(P) E2/CP860: Menu->Settings->Advanced Settings->Accounts->Account X->Display Name SIP VP-T49G/SIP-T48G/T48S: Menu->Advanced->Account->Account X->Register Name register_name = 01 (02 for SIP VP-T49G/CP860/ W56P IP phones) SIP-T46G/T46S/T29G: Menu->Advanced->Accounts->Account X->Register Name
PAGE 97
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface Settings->Accounts->Account X->Password SIP VP-T49G/SIP-T48G/T48S: Menu->Advanced->Account->Account X->SIP Server1/2 sip_server = 2 (01 for SIP VP-T49G/CP860/ W56P IP phones) SIP-T46G/T46S/T29G: Menu->Advanced->Accounts->Account X->SIP Server1/2 SIP-T42G/T42S/T41P/T41S/T40P/T27P/T27 G/T23P/T23G/T21(P) E2/T19(P) E2/CP860: Menu->Settings->Advanced Settings->Accounts->Acc
PAGE 98
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface VP-T49G/CP860 IP X->NAT Status phones) SIP-T46G/T46S/T29G: Menu->Advanced->Accounts->Account X->NAT Status SIP-T42G/T42S/T41P/T41S/T40P/T27P/T27 G/T23P/T23G/T21(P) E2/T19(P) E2/CP860: Menu->Settings->Advanced Settings->Accounts->Account X->NAT Status proxy-fallback-interval = 01 Menu->Advanced->Account->Account (only applicable to SIP X->Fallback Interval VP-T49
PAGE 99
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface VP-T49G/CP860/ Menu->Advanced->Network->VLAN W56P IP phones) ->WAN Port SIP-T42G/T42S/T41P/T41S/T40P/T27P/T27 G/T23P/T23G/T21(P) E2/T19(P) E2/CP860: Menu->Settings->Advanced Settings->Network->VLAN->WAN Port SIP pcport = 2 (02 for SIP VP-T49G/W56P IP phones; not applicable to CP860 IP phones) VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G: Menu->Advanced->Network->VLAN->PC P
PAGE 100
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface open-VPN = 2 (02 for SIP VP-T49G/CP860/ W56P IP phones; not applicable to SIP-T19(P) E2 IP phones) SIP VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G: Menu->Advanced->Network->VPN SIP-T42G/T42S/T41P/T41S/T40P/T27P/T27 G/T23P/T23G/T21(P) E2/CP860: Menu->Settings->Advanced Settings->Network->VPN SIP open-lldp = 2 (02 for SIP VP-T49G/CP860/ W56P IP phones) VP-T49G/SIP-T48G/T48S/T
PAGE 101
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface VP-T49G/CP860 IP Menu->Advanced->Phone Lock phones) CP860: Menu->Settings->Advanced Settings->Phone Lock SIP VP-T49G/SIP-T48G/T48S: Menu->Advanced->Reboot Adv_Reboot = 0 (02 for SIP VP-T49G/CP860/ W56P IP phones) SIP-T46G/T46S/T29G: Menu->Advanced->Reset&Reboot->Rebo ot SIP-T42G/T42S/T41P/T41S/T40P/T27P/T27 G/T23P/T23G/T21(P) E2/T19(P) E2/CP860: Menu->Settings->Adv
PAGE 102
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface to 1.) SIP-T42G/T42S/T41P/T41S/T40P/T27P/T27 G/T23P/T23G/T21(P) E2/T19(P) E2: Menu->Settings->Advanced Settings->Reset Config->Reset local settings (only appear when the parameter “static.auto_provision.custom.protect” is set to 1.
PAGE 103
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface W56P IP phones) SIP VP-T49G: Menu->Advanced->Reset Config->Reset Local Settings (only appear when the reset_default = 0 parameter “auto_provision.custom.protect” (only applicable to SIP is set to 1.) VP-T49G/CP860 IP CP860: phones) Menu->Settings->Advanced Settings->Reset Local Settings (only appear when the parameter “auto_provision.custom.protect” is set to 1.
PAGE 104
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface Settings->FWD International SMS= 0 (12 for SIP VP-T49G/CP860/ Menu->Message W56P IP phones) MSG_Voice = 0 (1 for SIP VP-T49G/CP860/ Menu->Message->Voice Mail W56P IP phones) viewvoicemail = 0 (1 for SIP Menu->Message->Voice Mail->View Voice VP-T49G/CP860/ Mail W56P IP phones) setvoicemail = 0 (1 for SIP Menu->Message->Voice Mail->Set Voice VP-T49G/CP860/ Mail
PAGE 105
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface local_call_log_list = 0 (01 for SIP VP-T49G/CP860/ Menu->Directory->Local Directory W56P IP phones) SIP VP-T49G/SIP-T48G/T48S: Menu->Advanced->Account Adv_Account = 0 SIP-T46G/T46S/T29G: (2 for SIP Menu->Advanced->Accounts VP-T49G/CP860/ SIP-T42G/T42S/T41P/T41S/T40P/T27P/T27 W56P IP phones) G/T23P/T23G/T21(P) E2/T19(P) E2/CP860: Menu->Settings->Advanced Setting
PAGE 106
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface Date->Time & Date Format SIP VP-T49G/SIP-T48G/T48S: Menu->Basic->Time& Date->General->Type (SNTP Settings) SIP-T46G/T46S/T29G: Basic_Time_SNTP = 0 Menu->Basic->Time & Date->General->SNTP Settings SIP-T42G/T42S/T41P/T41S/T40P/T27P/T27 G/T23P/T23G/T21(P) E2/T19(P) E2/CP860: Menu->Settings->Basic Settings->Time & Date->SNTP Settings MSG_Text = 0 Menu->Message->Text Mess
PAGE 107
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface Menu->Settings->Basic Settings blacklist_list = 0 Menu->Directory->Blacklist call_info = 0 Menu->History usb_record= 0 (only applicable to SIP-T48G/T48S/T46G/ Menu->USB T46S/T29G IP phones) browse_usb_record= 0 (only applicable to SIP-T48G/T48S/T46G/ Menu->USB->Browse Audio T46S/T29G IP phones) browse_usb_storage= 0 (only applicable to SIP-T48G/T48S/T46G/ Menu-
PAGE 108
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface Status SIP VP-T49G/SIP-T48G/T48S: Menu->Directory->All Contacts local_contact_list = 0 SIP-T46G/T46S/T42G/T42S/T41P/T41S/T40 P/T29G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP860: Menu->Directory->Local Directory remote_contact_list = 0 Menu->Directory->Remote Phone book status = 0 Menu->Status dnd = 0 Menu->Features->DND advanced_call_feature_ default_account =0
PAGE 109
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface VP-T49G/SIP-T48G/T48 S/T46G/T46S/T29G IP phones) reset_and_reboot_list = 0 (only applicable to Menu->Advanced->Reset&Reboot SIP-T46G/T46S/T29G IP phones) display_wallpaper = 0 (1 for SIP VP-T49G IP phones; only applicable to SIP Menu->Basic->Display->Wallpaper VP-T49G/SIP-T48G/T48 S/T46G/T46S/T29G IP phones) display_dsskey_wallpap er = 0 (only applicable to SIP-T48G
PAGE 110
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface usb_browse_photo = 00 (only applicable to SIP Menu->USB->Browse Photo VP-T49G IP phones) usb_storage_property = 00 (only applicable to SIP Menu->USB->Storage Space VP-T49G IP phones) hdmi = 00 [ GUI ] (only applicable to SIP Menu->Basic->HDMI VP-T49G IP phones) video_setting_interface = 00 (only applicable to SIP Menu->Basic->Video Setting VP-T49G IP phones) us
PAGE 111
Configuration Guide for User Access Level The following table lists configuration items in the WebItemsLevel.cfg file for configurations only integrated with BroadSoft UC-One firmware version on the phone user interface of the SIP VP-T49G/SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41P/T41S/T40P/T29G/T27P/T27G/T23P/T23G /T21(P) E2/T19(P) E2/CP860 IP phones.
PAGE 112
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface SIP-T42G/T42S/T41P/T41S/T40P/T27P/T27 G/T23P/T23G/T21(P) E2/T19(P) E2/CP860: Menu->Call Control->Do Not Disturb SIP callcontrol_sinultaneous ring = 1 (11 for SIP VP-T49G/CP860/ W56P IP phones) VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G: Menu->Features->Call Control->Simultaneous Ring Personal SIP-T42G/T42S/T41P/T41S/T40P/T27P/T27 G/T23P/T23G/T21(P) E2/T19(P) E2/CP860: Menu->
PAGE 113
Configuration Guide for User Access Level Parameters and Configuration Items on the Phone User Default Value Interface (not applicable to SIP SIP-T42G/T42S/T41P/T41S/T40P/T27P/T27 VP-T49G/CP860/W56P G/T23P/T23G/T21(P) E2/T19(P) E2: IP phones) Menu->Call Control->Executive Section Header SIP-T48G/T48S/T46G/T46S/T29G: callcontrol_securityclass Menu->Features->Call Control->Security ification = 1 Classification (not applicable to SIP SIP-T42G/T42S/T41P/T41S/T40P/T27P/T27 VP-T49G/CP860/W56P G
PAGE 114
Configuration Guide for User Access Level Section Header Parameters and Configuration Items on the Phone User Default Value Interface G/T23P/T23G/T21(P) E2/T19(P) E2/CP860: Menu->Call Control->Initial ACD State callcontrol_setacdstate =1 (11 for SIP VP-T49G/CP860/ W56P IP phones) [ GUI ] SIP VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G: Menu->Features->Call Control->ACD State SIP-T42G/T42S/T41P/T41S/T40P/T27P/T27 G/T23P/T23G/T21(P) E2/T19(P) E2/CP860: Menu->Call Control->ACD State SIP-T48G/T48S/T46G/T46S/T29
PAGE 115
Configuration Guide for User Access Level Configuration Parameters of Handset User Interface The following table lists configuration items in the WebItemsLevel.
PAGE 116
Configuration Guide for User Access Level Section Parameters and Default Configuration Items on the Handset Header Value User Interface Broadsoft_Contact_List= 0 OK->Directory->Network Directory LDAP_Contact_List= 0 OK->Directory->LDAP Menu_Settings = 0 OK->Settings DateTime = 0 OK->Settings->Date & Time Audio = 0 OK->Settings->Audio Advisory_Tones = 0 OK->Settings->Audio->Advisory Tones Ring_Tones = 0 OK->Settings->Audio->Ring Tones Volume = 0 Melodies = 0 [ GUI ] OK->Settings->Audi
PAGE 117
Configuration Guide for User Access Level Section Parameters and Default Configuration Items on the Handset Header Value User Interface Handset De_reg_Handset = 0 Handset Select_Base = 0 OK->Settings->Registration->Select Base Telephony = 0 OK->Settings->Telephony Auto_Answer = 0 OK->Settings->Telephony->Auto Answer Auto_Intercom = 0 Default_Line = 0 Incoming_Lines = 02 Speed_Dial = 0 Blacklist = 0 SystemSettings= 0 [ GUI ] OK->Settings->Registration->De-reg.
PAGE 118
Configuration Guide for User Access Level Section Parameters and Default Configuration Items on the Handset Header Value User Interface Settings->Repeater Mode HandsetName= [ GUI ] 0 OK->Settings->Handset Name UpgradeFirmware= 2 OK->Settings->Upgrade Firmware Menu_History = 0 OK->History All_Calls= 0 OK->History->All Calls Missed_Calls= 0 OK->History->Outgoing Calls Outgoing_Calls= 0 OK->History->Missed Calls Accepted_Calls= 0 OK->History->Accepted Calls Menu_Usermode = 0 OK->User Mo
PAGE 119
Appendix-B Sample Configuration Files SIP VP-T49G IP Phones The default configuration item settings in factory WebItemsLevel.cfg for SIP VP-T49G IP phones running firmware version 51.80.0.
PAGE 120
Configuration Guide for User Access Level account_password = 2 enabled-outbound-proxy-server = 01 outbound-proxy-server = 01 transport-item = 2 backup-outbound-proxy-server = 01 NAT_traversal = 2 sip_server = 2 proxy-fallback-interval = 01 [ Account-Basic ] switch-account = 0 proxy_require = 0 send_anonymous = 1 anonymous_call_enabled = 0 anonymous_call_OnCode = 1 anonymous_call_OffCode = 1 anonymous_rejection_enabled = 0 send_anonymous_rejection_code = 0 anonymous_rejection_OnCode = 1 anonymous_rejection_
PAGE 121
Configuration Guide for User Access Level session-refresher = 2 user-equal-phone = 2 voice-encryption = 2 ptime-item = 2 share-line = 2 Call-Pull-Feature-Access-Code = 2 dialog-info-call-pickup = 2 BLF-list-URI = 2 BlfListCode = 2 BLFListBargeInCode = 2 BLF-List-Retrieve-Code = 2 BLA-number = 2 BLA-subscription-period = 2 SIP-send-MAC = 2 SIP-send-line = 2 SIP-Reg-retry-timer = 2 conference-type = 2 conference-uri = 2 ACD-subscrip-period = 2 Earlymedia = 2 SIPServerType = 2 Music-ServerURI = 2 Direct-Call-
PAGE 122
Configuration Guide for User Access Level wan-ppoe = 2 [ Network-PCPort ] pcport-active = 0 [ Network-Advanced ] LLDP-items = 2 CDP-items = 2 VLAN-items = 2 NAT-items = 2 port-link = 2 voice-QoS = 2 local-RTP-port = 2 web-server = 2 8021x = 2 span-to-pc-port = 2 reg-surge-prev = 2 ICMPv6_Status = 2 open-VPN = 2 reserve-port = 0 [Network-Wifi] wifi-active = 2 wifi-list = 2 wifi-label = 2 wifi-ssid = 2 wifi-mode = 2 wifi-type = 2 wifi-psk = 2 wifi-edit = 2 wifi-status-detection-timeout = 0 [ DSSKey ] memoryk
PAGE 123
Configuration Guide for User Access Level Enable-Page-Tips = 0 Label-Length = 0 [ ProgramKey ] programmable-key = 0 [ ExtKey ] ext-key = 0 [ Features ] features-forward = 0 features-general = 0 features-audio = 0 features-intercom = 0 features-transfer = 0 features-callpickup = 0 features-remote = 0 features-phonelock = 0 features-acd = 0 features-sms = 0 features-actionurl = 0 features-bluetooth = 0 features-powerled = 0 features-notifypop = 0 [ Forward&DND ] head-forward = 0 forward-mode = 0 forward-acco
PAGE 124
Configuration Guide for User Access Level NoAnswer-forward-OnCode = 0 NoAnswer-forward-OffCode = 0 DND = 0 DND-Emergency = 0 DND-Authorized-Numbers = 0 DND-mode = 01 DND-account = 01 DND-Status = 01 DND-OnCode = 01 DND-OffCode = 01 forward-emergency = 0 forward-authorized-numbers = 0 [ General-Information ] call_waiting = 0 auto-redial = 0 auto_redial_interval = 0 auto_redial_times = 0 key_as_send = 0 reserve-pound = 2 hotline-number = 0 hotline-delay = 0 busytone_delay = 0 return-code-refuse = 0 return-co
PAGE 125
Configuration Guide for User Access Level AllowMute = 0 DualHeadset = 1 AutoAnswerDelay = 0 HeadsetPrior = 0 DTMFReplaceTran = 0 TranSendDTMF = 1 SendPoundKey = 0 FwdInternational = 0 Diversion-History-Info = 1 allow-trans-exist-call = 0 ReLogOffTime = 2 call-number-filter = 0 Use_Logo = 0 upload_logo = 0 allow-IP-call = 0 IP-direct-auto-answer = 0 calllog-show-num = 0 voicemail-tone = 0 DHCP-hostname = 0 EnableAutoFavorite = 0 reboot-in-talking = 0 Hide-Feature-Access-Codes = 0 display-method-on-dialing =
PAGE 126
Configuration Guide for User Access Level [ Features-Transfer ] semi-attend-transfer = 0 blind-tran-onhook = 0 Semi-Attend-Trans-OnHook = 0 transfer-on-conference-hang-up = 0 TransferModeViaDsskey = 0 [ Features-Callpickup ] Call-Pickup = 0 Call-Park = 0 [ Features-Remote ] pushxml-server-addr = 2 XMLSIPNotify = 2 XMLBlockInCalling = 1 ActionURILimitIP = 2 [ Features-Lock ] Lock_Enable = 2 keyboard_lock = 2 Phone_Unlock_PIN = 2 Phone_lock_time_out = 2 emergency_setting = 2 [ Features-ACD ] ACD-auto-availab
PAGE 127
Configuration Guide for User Access Level Forward-On-Code = 2 Forward-Off-Code = 2 Busy-Forward-On = 2 Busy-Forward-Off = 2 No-Answer-Forward-On = 2 No-Answer-Forward-Off = 2 TransferCall = 2 Blind-transfer-call = 2 Attended-transfer-call = 2 Hold = 2 Unhold = 2 Mute = 2 Unmute = 2 Missed-call = 2 IPChange = 2 IdletoBusy = 2 BusytoIdle = 2 RejectIncomingCall = 2 AnswerNewInCall = 2 TransferFailed = 2 TransferFinished = 2 ForwardIncomingCall = 2 UCServer = 2 ReportIP = 2 AutopFinish = 2 OpenCallWait = 2 Clo
PAGE 128
Configuration Guide for User Access Level [ Features-NotifyPop ] Display-Voice-Mail-Popup = 0 Display-Missed-Call-Popup = 0 Display-Forward-Call-Popup = 0 Display-Text-Message-Popup = 0 [ Settings ] settings-preference = 0 settings-datetime = 0 settings-calldisplay = 0 settings-upgrade = 0 settings-autop = 0 settings-config = 0 settings-dialplan = 0 settings-voice = 0 settings-ring = 1 settings-tones = 0 settings-softkey = 2 settings-tr069 = 2 settings-voicemonitoring = 0 settings-sip = 1 settings-camera =
PAGE 129
Configuration Guide for User Access Level sec_server = 0 update_interval = 0 daylight-time = 0 time_type = 0 daylight_date= 0 offset = 0 manual-time = 0 manual-time-settings = 0 time_format_setting = 0 date_format_setting = 0 location = 0 [ Settings-CallDisplay ] Display-Contact-Photo = 0 Incoming-Call-Ringer-Animation = 0 Call-Display-Method = 0 [ Settings-Upgrade ] version_info = 0 reset_to_factory = 1 reset_local_config = 0 reboot_device = 0 upgrade_firmware = 1 [ Settings-AutoProvision ] pnp-active = 2
PAGE 130
Configuration Guide for User Access Level [ Settings-Config ] opt-configfile = 1 opt-factory-configfile = 2 export-cfg-config-file = 2 import-cfg-config-file = 2 pcap_trace = 1 syslog = 1 SystemlogLevel = 2 ExportAllDiagnosticFiles = 2 [ Settings-DialPlan ] replace-rule = 0 dial-now = 0 area-code = 0 block-out = 0 replace-rule-control = 0 dial-now-control = 0 area-code-control = 0 block-out-control = 0 [ Settings-Voice ] echo-cancellation = 0 jitter-buffer = 0 [ Settings-Ring ] personal-ring = 1 [ Setting
PAGE 131
Configuration Guide for User Access Level RequestUsername = 2 RequestPassword = 2 [ Settings-VoiceMonitoring ] RTCP-Session-Report = 2 RTCP-Interval-Report = 2 RTCP-Interval-Period = 2 RTCP-Warning-Moslq = 2 RTCP-Critical-Moslq = 2 RTCP-Warning-Delay = 2 RTCP-Critical-Delay = 2 Display-VQReport-On-Web = 2 Display-VQReport-On-UI = 2 RTCP-Report-Options = 2 [ Settings-SIP ] sip-session-timer = 2 local-SIP-port = 2 TLS-SIP-Port = 2 [ Settings-Camera ] scene-mode = 2 manual-settings = 2 exposure = 2 status-bar
PAGE 132
Configuration Guide for User Access Level off_timeout = 2 user_input_ext_timeout = 2 [ Contacts ] contacts-basic = 0 contacts-remote = 0 contacts-callinfo = 0 contacts-LDAP = 0 contacts-broadsoft = 0 contacts-multicastIP = 0 contacts-favorite = 0 [ LocalPhoneBook ] contact-list = 0 all-contacts-control = 0 import-export-contacts = 1 btnImportCSV = 1 btnExportCSV = 1 btnImportXML = 1 btnExportXML = 1 opt-contacts = 0 [ Contacts-Remote ] remote-phonebook-list = 0 SRemoteNameEnable = 0 SRemoteNameFlashTime =
PAGE 133
Configuration Guide for User Access Level port = 0 base = 0 user-name = 0 password = 0 maxhits = 0 LDAP-name-attributes = 0 LDAP-number-attributes = 0 LDAP-display-name = 0 protocol = 0 LDAP-lookup-for-incoming-call = 0 LDAP-lookup-for-callout = 0 LDAP-sorting-results = 0 [ Contacts-Broadsoft ] Directotries = 0 XSI = 0 [ MulticastIP ] Receive_Priority = 0 MulticastIPConfig = 0 PagePriorityActive = 0 PagingList = 0 [ Contacts-Favorite ] contacts-group = 0 super-search = 0 [ Security ] password = 0 trusted_c
PAGE 134
Configuration Guide for User Access Level server-certs-records = 2 server-certs-upload = 2 server-certs-device-cert = 2 [ HiddenSetting ] custom-factory-config = 2 DND-Active = 2 Forward-Active = 2 Broadsoft-Active = 1 Redirect-Active = 1 UC-Active = 1 pushxml = 2 [ GUI ] status_list= 0 Status_IP = 11 Status_IPv6 = 11 Status_MAC = 21 Status_HW = 01 Status_More = 01 network = 0 Status_More_Phone = 0 Status_More_Account = 0 Status_More_RTP = 02 status_general = 02 features= 02 CallControl = 0 callcontrol_any
PAGE 135
Configuration Guide for User Access Level Features_AutoRD = 1 intercom = 1 call_completion = 1 history_save= 2 multpaginglist = 10 Main_Settings = 0 time_zone = 0 Basic_Time_Manual = 0 display = 10 sound = 1 key_tone = 1 ring_type_setting = 1 unlock_pin= 2 account_label = 02 display_name = 02 register_name = 02 user_name = 01 account_password = 01 sip_server = 01 enabled-outbound-proxy-server = 01 outbound-proxy-server = 01 STUN_server = 02 auto-Answer= 1 Adv_Network = 0 wan_port_title = 02 VLAN-items = 02
PAGE 136
Configuration Guide for User Access Level Adv_AES = 02 autoprovision = 02 international-forward = 02 SMS= 12 MSG_Voice = 1 viewvoicemail = 1 setvoicemail = 1 usermodeentry = 0 NAT_traversal = 02 contrast_ctrl = 0 callcontrol_initialacdstate = 11 callcontrol_setacdstate = 11 Main_Contacts = 0 local_contact_list = 0 remote_contact_list = 0 broadsoft_contact_list = 0 blacklist_list = 0 call_info= 0 local_call_log_list = 01 Adv_Account = 2 Basic_LANG = 0 Basic_Setting_BackLight = 0 Basic_Time_Format = 0 Basic_
PAGE 137
Configuration Guide for User Access Level broadsoft_calllog_list = 0 date_and_time_general = 0 phone_setting_list = 02 reset_and_reboot_list = 02 display_wallpaper = 1 reset_default = 0 bluetooth = 1 wifi = 2 camera_setting_interface = 00 usb_interface = 00 usb_browse_audio = 00 usb_browse_video = 00 usb_browse_photo = 00 usb_storage_property = 00 hdmi = 00 video_setting_interface = 00 proxy-fallback-interval = 01 SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41P/T41S/T4 0P/T29G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P)
PAGE 138
Configuration Guide for User Access Level account-register = 0 account-basic = 0 account-codec = 0 account-adv = 2 [ Account-Register ] switch-account = 0 account_status = 0 line_active = 0 account_label = 0 display_name = 0 register_name = 01 user_name = 01 account_password = 01 enabled-outbound-proxy-server = 2 outbound-proxy-server = 2 backup-outbound-proxy-server = 2 proxy-fallback-interval = 2 NAT_traversal = 2 sip_server = 2 sip_server2 = 2 outbound-proxy-server-port = 2 backup-outbound-proxy-server-
PAGE 139
Configuration Guide for User Access Level switch-account = 0 UDP_keep-alive = 2 local-SIP-port = 2 rport = 2 sip-session-timer = 2 subscribe-period = 2 DTMF_items = 2 reliable_retransmission = 2 MWI-items = 2 voice_mail = 2 caller-ID-header = 2 use-session-timer = 2 session-timer = 2 session-refresher = 2 user-equal-phone = 2 voice-encryption = 2 ptime-item = 2 share-line = 2 Call-Pull-Feature-Access-Code = 2 dialog-info-call-pickup = 2 BLF-list-URI = 2 BlfListCode = 2 BLFListBargeInCode = 2 BLF-List-Retri
PAGE 140
Configuration Guide for User Access Level subscribe-register = 2 udp-keep-alive-type = 2 udp-keep-alive-interval = 2 Number-Of-Linekey = 2 [ Network ] network-basic = 0 network-pcport = 0 network-advanced = 2 network-nat = 2 network-wifi = 0 [ Network-Basic ] ipaddress-mode = 0 ipv4config = 0 ipv6config = 0 [ Network-PCPort ] pcport-active = 0 [ Network-Nat ] manual = 2 manual-switch = 2 manual-ip = 2 ICE = 2 ICE-switch = 2 STUN = 2 STUN-switch = 2 STUN-server = 2 STUN-port = 2 TURN = 2 TURN-switch = 2 TUR
PAGE 141
Configuration Guide for User Access Level web-server = 2 8021x = 2 span-to-pc-port = 2 reg-surge-prev = 2 ICMPv6_Status = 2 open-VPN = 2 [ Network-Wifi ] wifi-active = 0 wifi-list = 0 wifi-label = 0 wifi-ssid = 0 wifi-mode = 0 wifi-type = 0 wifi-psk = 0 [ DSSKey ] linekey = 0 programmablekey = 0 extkey = 0 [ LineKey ] line-key = 0 Enable-Page-Tips = 0 Label-Length = 0 [ ProgramKey ] programmable-key = 0 [ ExtKey ] ext-key = 0 [ Features ] features-forward = 0 features-general = 0 features-audio = 0 featur
PAGE 142
Configuration Guide for User Access Level features-sms = 0 features-actionurl = 2 features-bluetooth = 0 features-powerled = 0 features-notifypop = 0 [ Forward&DND ] head-forward = 0 forward-mode = 0 forward-account = 0 always-forward = 0 always-forward-enabled = 0 always-forward-target = 0 always-forward-OnCode = 0 always-forward-OffCode = 0 busy-forward = 0 busy-forward-enabled = 0 busy-forward-target = 0 busy-forward-OnCode = 0 busy-forward-OffCode = 0 NoAnswer-forward = 0 NoAnswer-forward-enabled = 0 N
PAGE 143
Configuration Guide for User Access Level auto_redial_times = 0 key_as_send = 0 reserve-pound = 2 hotline-number = 0 hotline-delay = 0 busytone_delay = 0 return-code-refuse = 0 return-code-DND = 0 call_completion = 0 feature-key-synchronisation = 0 TimeOut-for-DialNow = 0 RFC-2543-Hold = 2 use-outbound-in-dialog = 2 IsDeal-180 = 2 logon-wizard = 2 PswPrefix = 0 PswLength = 0 PswDial = 0 SaveCallHistory = 2 SuppressDTMFDisplay = 1 SuppressDTMFDisplayDelay = 1 play-local-DTMF-tone = 0 DTMFRepetition = 0 Mult
PAGE 144
Configuration Guide for User Access Level voicemail-tone = 0 DHCP-hostname = 0 EnableAutoFavorite = 0 reboot-in-talking = 0 Hide-Feature-Access-Codes = 0 display-method-on-dialing = 2 calllog-show-num = 0 auto-linekeys = 1 sip-trust-control = 2 enable-auto-answer-tone = 0 [ Features-Audio ] call-waiting-tone = 0 button-sound = 0 redial_tone = 0 send-sound = 0 headset-send-volume = 1 handset-send-volume = 1 handfree-send-volume = 1 Ringer_Dev = 0 [ Features-Intercom ] allow-intercom = 0 intercom-mute = 0 in
PAGE 145
Configuration Guide for User Access Level [ Features-Lock ] Lock_Enable = 0 keyboard_lock = 0 Phone_Unlock_PIN = 0 Phone_lock_time_out = 0 emergency_setting = 0 [ Features-ACD ] ACD-auto-available = 2 ACD-auto-available-timer = 2 [ Features-ActionURL ] setup-complete = 2 log-on = 2 log-off = 2 register-fail = 2 off-hook = 2 on-hook = 2 incoming-call = 2 outgoing-call = 2 call-establish = 2 Call-Terminated = 2 DND-On = 2 DND-Off = 2 Forward-On-Code = 2 Forward-Off-Code = 2 Busy-Forward-On = 2 Busy-Forward-O
PAGE 146
Configuration Guide for User Access Level TransferFailed = 2 TransferFinished = 2 ForwardIncomingCall = 2 UCServer = 2 ReportIP = 2 AutopFinish = 2 OpenCallWait = 2 CloseCallWait = 2 Headset = 2 Handfree = 2 CancelCallOut = 2 RemoteBusy = 2 CallRemoteCanceled = 2 [ Features-Bluetooth ] bluetooth-active = 0 [ Features-PowerLED ] common-power-light-on = 0 ring-power-light-flash = 0 mail-power-light-flash = 0 mute-power-light-flash = 0 hold-power-light-flash = 0 talk-power-light-flash = 0 misscall-power-ligh
PAGE 147
Configuration Guide for User Access Level settings-tones = 2 settings-softkey = 2 settings-tr069 = 2 settings-voicemonitoring = 2 settings-sip = 2 settings-powersaving = 0 [ Settings-Preference ] web-language = 0 live-dialpad = 0 inter-digit-time = 0 transparency =0 UnusedBackLight = 0 backlight = 0 BacklightTime = 0 contrast_ctrl = 0 watchdog = 2 ring_type_setting = 0 Wallpaper = 0 ScreenSaver = 0 ScreenSaverUpload = 0 [ Settings-PowerSaving ] enable = 2 office_timeout = 0 off_timeout = 0 user_input_ext_
PAGE 148
Configuration Guide for User Access Level update_interval = 0 daylight-time = 0 time_type = 0 daylight_date= 0 offset = 0 manual-time = 0 manual-time-settings = 0 time_format_setting = 0 date_format_setting = 0 location = 0 [ Settings-CallDisplay ] Display-Contact-Photo = 0 Incoming-Call-Ringer-Animation = 0 Call-Display-Method = 0 [ Settings-Upgrade ] version_info = 0 reset_to_factory = 2 reboot_device = 0 upgrade_firmware = 0 reset = 0 reset_local_settings = 0 reset_nonstatic_settings = 0 reset_static_se
PAGE 149
Configuration Guide for User Access Level day-of-week = 2 btn-autop-now = 2 attempt-expired-time = 2 weekly-upgrade-interval = 2 inactivity-time-expire = 2 flexible-switch = 2 flexible-interval = 2 flexible-autoptime = 2 [ Settings-Config ] opt-configfile = 0 opt-factory-configfile = 0 export-cfg-config-file = 0 import-cfg-config-file = 0 pcap_trace = 0 ExportAllDiagnosticFiles = 0 Local_Logging = 0 Local_Log_Switch = 0 Local_Log_Level = 0 Local_Log_Max_File_Size = 0 Local_Log_Export = 0 Syslog_Switch =
PAGE 150
Configuration Guide for User Access Level echo-cancellation = 2 jitter-buffer = 2 [ Settings-Ring ] personal-ring = 2 [ Settings-Tones ] tone-items = 2 tone-country = 2 [ Softkey ] Custom_SoftKey = 2 SoftKey_Type = 2 SoftKey_Select = 2 [ TR069 ] head = 2 EnableTR069 = 2 ACSUsername = 2 ACSPassword = 2 ACSURL = 2 EnablePeriodicInform = 2 PeriodicInformInterval = 2 RequestUsername = 2 RequestPassword = 2 [ Settings-VoiceMonitoring ] RTCP-Session-Report = 2 RTCP-Interval-Report = 2 RTCP-Interval-Period = 2 RT
PAGE 151
Configuration Guide for User Access Level [ Contacts ] contacts-basic = 0 contacts-remote = 1 contacts-callinfo = 0 contacts-LDAP = 1 contacts-broadsoft = 0 contacts-multicastIP = 1 contacts-favorite = 0 [ LocalPhoneBook ] contact-list = 0 all-contacts-control = 0 import-export-contacts = 0 btnImportCSV = 0 btnExportCSV = 0 btnImportXML = 0 btnExportXML = 0 opt-contacts = 0 [ Contacts-Remote ] remote-phonebook-list = 1 SRemoteNameEnable = 1 SRemoteNameFlashTime = 1 [ PhoneCallInfo ] call-control = 0 dialed
PAGE 152
Configuration Guide for User Access Level LDAP-name-attributes = 0 LDAP-number-attributes = 0 LDAP-display-name = 0 protocol = 0 LDAP-lookup-for-incoming-call = 0 LDAP-lookup-for-callout = 0 LDAP-sorting-results = 0 [ Apps ] broadsoft-XSI = 1 broadsoft-XMPP = 1 [ Broadsoft ] XSI = 1 Directotries = 1 XMPP-accout = 1 XMPP-userame = 1 XMPP-password = 1 CallLog = 1 [ MulticastIP ] Receive_Priority = 1 MulticastIPConfig = 1 PagePriorityActive = 1 PagingList = 1 [ Contacts-Favorite ] contacts-group = 0 super-se
PAGE 153
Configuration Guide for User Access Level [ ServerCerts ] server-certs-records = 2 server-certs-upload = 2 server-certs-device-cert = 2 [ HiddenSetting ] custom-factory-config = 2 DND-Active = 2 Forward-Active = 2 Broadsoft-Active = 2 Redirect-Active = 2 UC-Active = 2 pushxml = 2 XSI-Active = 2 remote_pcap = 2 remote_pcap_switch = 2 remote_pcap_port = 2 remote_pcap_password = 2 [ GUI ] status_list= 0 Status_IP = 0 Status_IPv6 = 0 Status_MAC = 0 Status_HW = 0 Status_More = 0 network = 0 Status_More_Phone =
PAGE 154
Configuration Guide for User Access Level callcontrol_mobility =1 callcontrol_group_night_forward =1 callcontrol_callwaiting =1 callcontrol_forward_selective =1 callcontrol_executive =1 callcontrol_securityclassification =1 callcontrol_executive_assistant =1 call_waiting = 0 DSSKey = 0 key_as_send= 0 hotline-number = 0 Features_Anonymous = 0 Features_AutoRD = 0 intercom = 0 call_completion = 0 history_save= 2 multpaginglist = 2 Main_Settings= 0 time_zone = 0 Basic_Time_Manual = 0 display = 0 sound = 0 key_
PAGE 155
Configuration Guide for User Access Level 8021x = 2 open-VPN = 2 open-lldp = 2 network_cdp = 2 network_nat = 2 keyboard_lock = 0 Adv_Reboot = 0 Adv_ResetToFac = 2 password = 0 autoprovision = 2 international-forward = 2 SMS= 0 MSG_Voice = 0 viewvoicemail = 0 setvoicemail = 0 usermodeentry = 0 NAT_traversal = 2 contrast_ctrl = 0 broadsoft_contact_list = 1 callcontrol_initialacdstate = 1 callcontrol_setacdstate = 1 Main_Contacts = 0 local_contact_list = 0 remote_contact_list = 0 blacklist_list = 0 call_info=
PAGE 156
Configuration Guide for User Access Level dnd= 0 advanced_call_feature_default_account = 0 advanced_call_feature_general = 0 advanced_call_feature_list = 0 broadsoft_calllog_list = 0 date_and_time_general = 0 reset_and_reboot_list = 0 bluetooth = 0 display_wallpaper = 0 reset_default = 0 wifi = 0 Features_Diagnostics = 0 Diagnostics_Network = 0 Diagnostics_Ping = 0 Diagnostics_TraceRoute = 0 display_dsskey_wallpaper = 0 usb_record= 0 browse_usb_record= 0 browse_usb_storage= 0 Adv_ResetConfig = 0 ResetLocal
PAGE 157
Configuration Guide for User Access Level NetworkCommon = 0 AccountStatus = 0 Ext = 0 [ Account ] account-register = 0 account-basic = 0 account-codec = 0 account-adv = 0 [ Account-Register ] switch-account = 0 account_status = 0 line_active = 0 account_label = 0 display_name = 0 register_name = 01 user_name = 01 account_password = 2 enabled-outbound-proxy-server = 01 outbound-proxy-server = 01 transport-item = 2 backup-outbound-proxy-server = 01 proxy-fallback-interval = 01 NAT_traversal = 2 sip_server =
PAGE 158
Configuration Guide for User Access Level switch-account = 0 codecs-group = 0 [ Account-Adv ] switch-account = 0 UDP_keep-alive = 2 local-SIP-port = 2 rport = 2 sip-session-timer = 2 subscribe-period = 2 DTMF_items = 2 reliable_retransmission = 2 MWI-items = 2 voice_mail = 0 caller-ID-header =2 use-session-timer = 2 session-timer = 2 session-refresher = 2 user-equal-phone = 2 voice-encryption = 2 ptime-item = 2 share-line = 2 Call-Pull-Feature-Access-Code = 2 dialog-info-call-pickup = 2 BLF-list-URI = 2 Bl
PAGE 159
Configuration Guide for User Access Level RTCP-Collector-Name = 2 RTCP-Collector-Address = 2 RTCP-Collector-Port = 2 Number-Of-Linekey = 1 voice_mail_display = 2 subscribe-register = 2 [ Network ] network-basic = 0 network-pcport = 0 network-advanced = 0 shotlevel = 0 [ Network-Basic ] ipaddress-mode = 2 ipv4config = 2 ipv6config = 2 wan-ppoe = 2 [ Network-PCPort ] pcport-active = 0 [ Network-Advanced ] LLDP-items = 2 CDP-items = 2 VLAN-items = 2 NAT-items = 2 port-link = 2 voice-QoS = 2 local-RTP-port = 2
PAGE 160
Configuration Guide for User Access Level memory-key = 0 [ LineKey ] line-key = 0 Enable-Page-Tips = 0 Label-Length = 0 [ ProgramKey ] programmable-key = 0 [ ExtKey ] ext-key = 0 [ Features ] features-forward = 0 features-general = 0 features-audio = 0 features-intercom = 0 features-transfer = 0 features-callpickup = 0 features-remote = 0 features-phonelock = 0 features-acd = 0 features-sms = 0 features-actionurl = 0 features-powerled = 0 features-notifypop = 0 [ Forward&DND ] head-forward = 0 forward-mode
PAGE 161
Configuration Guide for User Access Level NoAnswer-forward-enabled = 0 NoAnswer-forward-ringtimes = 0 NoAnswer-forward-target = 0 NoAnswer-forward-OnCode = 0 NoAnswer-forward-OffCode = 0 DND = 0 DND-Emergency = 0 DND-Authorized-Numbers = 0 DND-mode = 01 DND-account = 01 DND-Status = 01 DND-OnCode = 01 DND-OffCode = 01 forward-emergency = 0 forward-authorized-numbers = 0 [ General-Information ] call_waiting = 0 auto-redial = 0 auto_redial_interval = 0 auto_redial_times = 0 key_as_send = 0 reserve-pound = 2
PAGE 162
Configuration Guide for User Access Level MulticastCodec = 0 PlayHoldTone = 0 PlayHoldToneDelay = 0 AllowMute = 0 DualHeadset = 1 AutoAnswerDelay = 0 HeadsetPrior = 0 DTMFReplaceTran = 0 TranSendDTMF = 1 SendPoundKey = 0 FwdInternational = 0 Diversion-History-Info = 1 allow-trans-exist-call = 0 ReLogOffTime = 2 call-number-filter = 0 Use_Logo = 0 upload_logo = 0 allow-IP-call = 0 IP-direct-auto-answer = 0 calllog-show-num = 0 voicemail-tone = 0 DHCP-hostname = 0 EnableAutoFavorite = 0 reboot-in-talking = 0
PAGE 163
Configuration Guide for User Access Level intercom-tone = 0 intercom-barge = 0 [ Features-Transfer ] semi-attend-transfer = 0 Semi-Attend-Trans-OnHook = 0 blind-tran-onhook = 0 transfer-on-conference-hang-up = 0 TransferModeViaDsskey = 0 [ Features-Callpickup ] Call-Pickup = 0 Call-Park = 0 [ Features-Remote ] pushxml-server-addr = 2 XMLSIPNotify = 2 XMLBlockInCalling = 1 ActionURILimitIP = 2 [ Features-Lock ] Lock_Enable = 2 keyboard_lock = 2 Phone_Unlock_PIN = 2 Phone_lock_time_out = 2 emergency_setting
PAGE 164
Configuration Guide for User Access Level Forward-On-Code = 2 Forward-Off-Code = 2 Busy-Forward-On = 2 Busy-Forward-Off = 2 No-Answer-Forward-On = 2 No-Answer-Forward-Off = 2 TransferCall = 2 Blind-transfer-call = 2 Attended-transfer-call = 2 Hold = 2 Unhold = 2 Mute = 2 Unmute = 2 Missed-call = 2 IPChange = 2 IdletoBusy = 2 BusytoIdle = 2 RejectIncomingCall = 2 AnswerNewInCall = 2 TransferFailed = 2 TransferFinished = 2 ForwardIncomingCall = 2 UCServer = 2 ReportIP = 2 AutopFinish = 2 OpenCallWait = 2 Clo
PAGE 165
Configuration Guide for User Access Level Display-Text-Message-Popup = 0 [ Settings ] settings-preference = 0 settings-datetime = 0 settings-calldisplay = 0 settings-upgrade = 0 settings-autop = 0 settings-config = 0 settings-dialplan = 0 settings-voice = 0 settings-ring = 1 settings-tones = 0 settings-softkey = 2 settings-tr069 = 2 settings-voicemonitoring = 0 settings-sip = 1 [ Settings-Preference ] web-language = 0 live-dialpad = 0 inter-digit-time = 0 UnusedBackLight = 0 backlight = 0 BacklightTime = 0
PAGE 166
Configuration Guide for User Access Level date_format_setting = 0 location = 0 [ Settings-CallDisplay ] Display-Contact-Photo = 0 Incoming-Call-Ringer-Animation = 0 Call-Display-Method = 0 [ Settings-Upgrade ] version_info = 0 reset_to_factory = 1 reset = 2 reset_local_config = 0 reboot_device = 0 upgrade_firmware = 1 [ Settings-AutoProvision ] pnp-active = 2 dhcp-active = 2 custom-option = 2 DHCP-Option-Value = 2 server-URL = 2 account = 2 password = 2 common-AES-key = 2 MAC-Oriented-AES-key = 2 zero_acti
PAGE 167
Configuration Guide for User Access Level SystemlogLevel = 2 ExportAllDiagnosticFiles = 2 [ Settings-DialPlan ] replace-rule = 0 dial-now = 0 area-code = 0 block-out = 0 replace-rule-control = 0 dial-now-control = 0 area-code-control = 0 block-out-control = 0 [ Settings-Voice ] echo-cancellation = 0 jitter-buffer = 0 [ Settings-Ring ] personal-ring = 1 [ Settings-Tones ] tone-items = 0 [ Softkey ] Custom_SoftKey = 2 SoftKey_Type = 2 SoftKey_Select = 2 [ TR069 ] head = 2 EnableTR069 = 2 ACSUsername = 2 ACS
PAGE 168
Configuration Guide for User Access Level RTCP-Critical-Moslq = 2 RTCP-Warning-Delay = 2 RTCP-Critical-Delay = 2 Display-VQReport-On-Web = 2 Display-VQReport-On-UI = 2 RTCP-Report-Options = 2 [ Settings-SIP ] sip-session-timer = 2 local-SIP-port = 2 TLS-SIP-Port = 2 [ Contacts ] contacts-basic = 0 contacts-remote = 0 contacts-callinfo = 0 contacts-LDAP = 0 contacts-broadsoft = 0 contacts-multicastIP = 0 contacts-favorite = 0 [ LocalPhoneBook ] contact-list = 0 all-contacts-control = 0 import-export-contact
PAGE 169
Configuration Guide for User Access Level forwarded-list-title = 0 forwarded-list-content = 0 [ LDAP ] enable-LDAP = 0 LDAP-name-filter = 0 LDAP-number-filter = 0 LDAP-TLS-Mode = 0 server-address = 0 port = 0 base = 0 user-name = 0 password = 0 maxhits = 0 LDAP-name-attributes = 0 LDAP-number-attributes = 0 LDAP-display-name = 0 protocol = 0 LDAP-lookup-for-incoming-call = 0 LDAP-lookup-for-callout = 0 LDAP-sorting-results = 0 [ Contacts-Broadsoft ] Directotries = 0 XSI = 0 [ MulticastIP ] Receive_Priority
PAGE 170
Configuration Guide for User Access Level only-accept-trusted-certs = 2 upload-trust-certs = 2 common-name-validation = 2 ca-certs = 2 [ ServerCerts ] server-certs-records = 2 server-certs-upload = 2 server-certs-device-cert = 2 [ HiddenSetting ] custom-factory-config = 2 DND-Active = 2 Forward-Active = 2 Broadsoft-Active = 1 Redirect-Active = 1 UC-Active = 1 pushxml = 2 [ GUI ] status_list= 0 Status_IP = 11 Status_IPv6 = 11 Status_MAC = 21 Status_HW = 01 Status_More = 01 network = 0 Status_More_Phone = 0
PAGE 171
Configuration Guide for User Access Level call_waiting = 1 DSSKey = 1 key_as_send= 12 hotline-number = 1 Features_Anonymous = 1 Features_AutoRD = 1 intercom = 1 call_completion = 1 history_save= 2 multpaginglist = 10 Main_Settings = 0 time_zone = 0 Basic_Time_Manual = 0 display = 10 sound = 1 key_tone = 1 ring_type_setting = 1 unlock_pin= 2 account_label = 02 display_name = 02 register_name = 02 user_name = 01 account_password = 01 sip_server = 01 enabled-outbound-proxy-server = 01 outbound-proxy-server =
PAGE 172
Configuration Guide for User Access Level network_nat = 02 softkey Label = 02 keyboard_lock = 02 Adv_Reboot = 02 Adv_ResetToFac = 2 password = 0 Adv_AES = 02 autoprovision = 02 international-forward = 02 SMS= 12 MSG_Voice = 1 viewvoicemail = 1 setvoicemail = 1 usermodeentry = 0 NAT_traversal = 02 contrast_ctrl = 0 broadsoft_contact_list = 0 callcontrol_initialacdstate = 11 callcontrol_setacdstate = 11 Main_Contacts = 0 local_contact_list = 0 remote_contact_list = 0 blacklist_list = 0 call_info= 0 local_cal
PAGE 173
Configuration Guide for User Access Level line_active = 2 status = 0 dnd= 0 reset_default = 0 usb-record = 0 browserecordfiles = 0 browseusbstorge = 0 W56P IP DECT Phones The default configuration item settings in factory WebItemsLevel.
PAGE 174
Configuration Guide for User Access Level switch-account = 0 account_status = 0 line_active = 0 account_label = 0 display_name = 0 register_name = 01 user_name = 01 account_password = 2 enabled-outbound-proxy-server = 01 outbound-proxy-server = 01 transport-item = 2 backup-outbound-proxy-server = 01 proxy-fallback-interval = 01 NAT_traversal = 2 sip_server = 2 [ Account-Basic ] switch-account = 0 proxy_require = 0 send_anonymous = 1 anonymous_call_enabled = 0 anonymous_call_OnCode = 1 anonymous_call_OffCo
PAGE 175
Configuration Guide for User Access Level sip-session-timer = 2 subscribe-period = 2 DTMF_items = 2 reliable_retransmission = 2 MWI-items = 2 voice_mail = 0 caller-ID-header = 2 use-session-timer = 2 session-timer = 2 session-refresher = 2 user-equal-phone = 2 voice-encryption = 2 ptime-item = 2 share-line = 2 SIP-send-MAC = 2 SIP-send-line = 2 SIP-Reg-retry-timer = 2 conference-type = 2 conference-uri = 2 SIPServerType = 2 UnregisterOnReboot = 2 RTCP-Collector-Name = 3 RTCP-Collector-Address = 3 RTCP-Coll
PAGE 176
Configuration Guide for User Access Level [ Network-Basic ] ipaddress-mode = 2 ipv4config = 2 wan-ppoe = 2 [ Network-Advanced ] LLDP-items = 2 VLAN-items = 2 NAT-items = 2 voice-QoS = 2 local-RTP-port = 2 web-server = 2 8021x = 2 reg-surge-prev = 2 open-VPN = 2 [ Features ] features-forward = 0 features-general = 0 features-audio = 0 features-transfer = 0 features-callpickup = 0 features-phonelock = 0 features-powerled = 0 [ Forward&DND ] head-forward = 0 forward-mode = 0 forward-account = 0 always-for
PAGE 177
Configuration Guide for User Access Level busy-forward-enabled = 0 busy-forward-target = 0 busy-forward-OnCode = 0 busy-forward-OffCode = 0 NoAnswer-forward = 0 NoAnswer-forward-enabled = 0 NoAnswer-forward-ringtimes = 0 NoAnswer-forward-target = 0 NoAnswer-forward-OnCode = 0 NoAnswer-forward-OffCode = 0 DND = 0 DND-mode = 01 DND-account = 01 DND-Status = 01 DND-OnCode = 01 DND-OffCode = 01 [ General-Information ] call_waiting = 0 key_as_send = 0 reserve-pound = 2 busytone_delay = 0 return-code-refuse = 0
PAGE 178
Configuration Guide for User Access Level voicemail-tone = 0 DHCP-hostname = 0 reboot-in-talking = 0 display-method-on-dialing = 2 sip-trust-control = 2 end-call-onhook = 0 [ Features-Audio ] call-waiting-tone = 0 [ Features-Transfer ] semi-attend-transfer = 0 Semi-Attend-Trans-OnHook = 0 blind-tran-onhook = 0 [ Features-Callpickup ] Call-Park = 0 [ Features-Lock ] emergency_setting = 2 [ Features-PowerLED ] common-power-light-on = 0 ring-power-light-flash = 0 mail-power-light-flash = 0 miss-call-ligh
PAGE 179
Configuration Guide for User Access Level settings-tr069 = 2 settings-voicemonitoring = 3 settings-sip = 1 [ Settings-Preference ] web-language = 0 watchdog = 2 [ Time&Date ] DHCP-Time = 0 time_zone = 0 NTP_priority = 0 prim_server = 0 sec_server = 0 update_interval = 0 daylight-time = 0 time_type = 0 daylight_date = 0 offset = 0 manual-time = 0 manual-time-settings = 0 time_format_setting = 0 date_format_setting = 0 location = 0 [ Settings-CallDisplay ] Incoming-Call-Ringer-Animation = 0 Call-Display-M
PAGE 180
Configuration Guide for User Access Level [ Settings-AutoProvision ] pnp-active = 2 dhcp-active = 2 custom-option = 2 DHCP-Option-Value = 2 server-URL = 2 account = 2 password = 2 common-AES-key = 2 MAC-Oriented-AES-key = 2 poweron-active = 2 repeatly-active = 2 repeat-interval = 2 weekly-active = 2 autop-time = 2 day-of-week = 2 btn-autop-now = 2 attempt-expired-time = 2 [ Settings-Config ] opt-configfile = 1 opt-factory-configfile = 2 export-cfg-config-file = 2 import-cfg-config-file = 2 pcap_trace = 1
PAGE 181
Configuration Guide for User Access Level [ Settings-Voice ] echo-cancellation = 0 jitter-buffer = 0 [ Settings-Tones ] tone-items = 0 [ TR069 ] head = 2 EnableTR069 = 2 ACSUsername = 2 ACSPassword = 2 ACSURL = 2 EnablePeriodicInform = 2 PeriodicInformInterval = 2 RequestUsername = 2 RequestPassword = 2 [ Settings-VoiceMonitoring ] RTCP-Session-Report = 2 RTCP-Interval-Report = 2 RTCP-Interval-Period = 2 RTCP-Warning-Moslq = 2 RTCP-Critical-Moslq = 2 RTCP-Warning-Delay = 2 RTCP-Critical-Delay = 2 Displa
PAGE 182
Configuration Guide for User Access Level contacts-basic = 0 contacts-remote = 0 contacts-LDAP = 0 contacts-broadsoft = 0 contacts-favorite = 0 [ Contacts-Basic ] download-contacts = 0 import-contacts = 0 export-contacts = 0 [ Contacts-Remote ] remote-phonebook-list = 0 SRemoteNameEnable = 0 SRemoteNameFlashTime = 0 [ LDAP ] enable-LDAP = 0 LDAP-name-filter = 0 LDAP-number-filter = 0 LDAP-TLS-Mode = 0 server-address = 0 port = 0 base = 0 user-name = 0 password = 0 maxhits = 0 LDAP-name-attributes = 0 LD
PAGE 183
Configuration Guide for User Access Level XSI = 0 [ Contacts-Favorite ] contacts-group = 0 super-search = 0 [ Security ] password = 0 trusted_cert = 2 server_cert = 2 base-pin = 0 [ BasePin ] base-unit-pin = 0 [ TrustCerts ] trust-certs-records = 2 btn-delete-certs = 2 only-accept-trusted-certs = 2 upload-trust-certs = 2 common-name-validation = 2 ca-certs = 2 [ ServerCerts ] server-certs-records = 2 server-certs-upload = 2 server-certs-device-cert = 2 [ HiddenSetting ] custom-factory-config = 2 DND-
PAGE 184
Configuration Guide for User Access Level Base = 0 Handset = 0 LineStatus = 0 Menu_Intercom = 0 Intercom_HSXS = 0 Intercom_ALLHS = 0 Menu_VoiceMail = 0 Play_Message = 0 Set_Voice_Mail = 0 Set_Key_1 = 0 Menu_CallFeatures = 0 CallForward = 0 AlwaysForward = 0 BusyForward = 0 NoAnswerForward = 0 DND = 0 CallWaiting = 0 AnonymousRejection = 0 AnonymousCall = 0 Menu_Directory = 0 Local_Contact_List = 0 Remote_Contact_List = 0 Broadsoft_Contact_List = 0 LDAP_Contact_List = 0 Menu_Settings = 0 DateTime = 0 A
PAGE 185
Configuration Guide for User Access Level Display = 0 Screen_Saver = 0 Color_Schemes = 0 Wallpaper = 0 Display_Backlight = 0 Keypad_Light = 0 Notification_Light = 0 Time_Formate = 0 Date_Formate = 0 Input_Method = 0 Shortcut = 0 Soft_Left = 0 Soft_Right = 0 Up = 0 Down = 0 Left = 0 Right = 0 Language = 0 Registration = 0 De_reg_Hadndset = 0 Select_Base = 0 Telephony = 0 Auto_Answer = 0 Auto_Intercom = 0 Default_Line = 0 Incoming_Lines = 02 Speed_Dial = 0 Blacklist = 0 SystemSettings = 0 Network = 0 Lo
PAGE 186
Configuration Guide for User Access Level Change_Base_PIN = 02 Base_Reset = 02 Base_Reset_Local_Cfg = 02 Base_Restart = 02 Auto_Provision = 02 RPS = 02 Eco_Mode_Plus = 02 Eco_Mode = 0 Repeater_Mode = 02 HandsetName = 0 UpgradeFirmware = 2 Menu_History = 0 All_Calls = 0 Missed_Calls = 0 Outgoing_Calls = 0 Accepted_Calls = 0 Menu_Usermode = 0 186
PAGE 187
Configuration Guide for User Access Level Customer Feedback We are striving to improve our documentation quality and we appreciate your feedback. Email your opinions and comments to DocsFeedback@yealink.com.