User Guide
Table Of Contents
- About This Guide
- Table of Contents
- Overview
- Getting Started
- Packaging Contents
- Phone Installation
- Network Connection
- Phone Initialization
- Phone Status
- Basic Network Settings
- Wireless Network Settings
- Registration
- Idle Screen
- Entering Data and Editing Fields
- Customizing Your Phone
- Basic Call Features
- Advanced Phone Features
- Appendix
- Index
User Guide for the SIP-T41S IP Phone
28
1) Select Edit.
2) Edit the desired wireless network information.
3) Press the Save soft key.
- To change the priority of the wireless network:
1) Select Move Up or Move Down to improve or lower the priority of the wireless
network that the IP phone automatically connects to.
- To delete the saved wireless network profile(s):
1) Select Delete or Delete All.
If you delete your wireless network profile from your phone, you need to
manually connect to it next time.
Disconnecting the Wireless Network Connection
To disconnect wireless network via phone user interface:
1. Press Menu->Settings->Basic Settings->Wi-Fi->X Available Network(s) (X represents
the number of available networks)
2. Select the connected wireless network, and then press the Disconnect soft key.
The wireless network is disconnected. You can press the Connect soft key to connect
again.
Deactivating the Wi-Fi Mode
To deactivate the Wi-Fi mode via phone user interface:
1. Press Menu->Settings->Basic Settings->Wi-Fi.
2. Press or , or the Switch soft key to select Off from the Wi-Fi field.
3. Press the Save soft key to accept the change.
Wi-Fi is configurable via web user interface at the path Network->Wi-Fi.
Registration
Generally, your phone will be deployed with multiple other phones. In this case, your system
administrator will configure the phone parameters beforehand, so that after you start up your
phone, the phone will be registered and ready for use. The SIP-T41S IP phone supports up to 6
accounts. If your phone is not registered, you may have to register it. For more information on