User Guide
Table Of Contents
- About This Guide
- Table of Contents
- Overview
- Getting Started
- Packaging Contents
- Phone Installation
- Network Connection
- Phone Initialization
- Phone Status
- Basic Network Settings
- Wireless Network Settings
- Registration
- Idle Screen
- Entering Data and Editing Fields
- Customizing Your Phone
- Basic Call Features
- Advanced Phone Features
- Appendix
- Index
Getting Started
25
3. Press or to select the desired wireless network.
4. Press the Connect soft key.
5. If the network is secure, enter its password in the Password field.
6. Press the OK soft key.
Once the connection has completed successfully, the icon appears after the name of
the wireless network.
The Wi-Fi status is displayed on the center of LCD screen when the phone is idle.
Note
Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) provides simplified mechanisms to configure secure wireless
networks. WPS can automatically configure a wireless network with a network name (SSID) and
strong WPA data encryption and authentication.
Two methods supported by Yealink IP phones in the Wi-Fi protected setup:
Push Button Configuration (PBC): The user simply has to press WPS key on both the IP
phone and gateway/router to connect.
Personal Identification Number (PIN): The user has to enter a PIN generated randomly
by the IP phone on the gateway/router to connect.
For more information on the password of the wireless network, contact your system
administrator.