Operation Manual

User Guide for the SIP-T40P IP Phone

You can enable live dialpad feature on the SIP-T40P IP phone, which enables the IP

phone to automatically dial out a phone number without pressing the send key. You can

also configure a delay, and then the phone will dial out the phone number

automatically after the designated period of time.

To enable live dialpad via web user interface:

1. Click on Settings->Preference.

2. Select Enabled from the pull-down list of Live Dialpad.

3. Enter the desired delay time in the Inter Digit Time(1~14s) field.

The default delay time is 4 seconds.

4. Click Confirm to accept the change.

Note

You can dial a hotline number immediately upon lifting the handset, pressing the

Speakerphone key or the line key. You can also configure a delay, and then the phone

will dial out the hotline number automatically after the designated period of time.

To configure the hot line number via phone user interface:

1. Press Menu->Features->Hot Line.

Live dialpad is configurable via web user interface only.