Specifications

Administrator’s Guide for SIP-T2xP IP Phones
74
Local
Web User Interface
Configure auto answer.
Navigate to:
http://<phoneIPAddress>/servlet
?p=account-basic&q=load&acc
=0
Phone User Interface
Configure auto answer.
To configure auto answer via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Basic.
4. Select the desired value from the pull-down list of Auto Answer.
5. Click Confirm to accept the change.
To configure auto answer via phone user interface:
1. Press Menu->Settings->Advanced Settings (password: admin) ->Accounts.
2. Select the desired account and then press the Enter soft key.
3. Press or , or the Switch soft key to select the desired value from the Auto
Answer field.
4. Press the Save soft key to accept the change.
Call Completion
Call completion allows users to monitor the busy party and establish a call when the
busy party becomes available to receive a call. Two factors commonly prevent a call
from connecting successfully:
 Callee does not answer
 Callee actively rejects the incoming call before answering