Specifications

Administrator’s Guide for SIP-T2xP IP Phones
56
Procedure
The logo shown on the idle screen can be configured using the configuration files or
locally.
Configuration File
<y0000000000xx>.cfg
Configure the logo shown on the
idle screen.
For more information, refer to
Logo Customization on page
273.
Local
Web User Interface
Configure the logo shown on the
idle screen.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
To configure an image logo via web user interface (not applicable to the SIP-T20P IP
phone):
1. Click on Features->General Information.
2. Select Custom logo from the pull-down list of Use Logo.
3. Click Browse to select the logo file from your local system.
4. Click Upload to upload the file.
5. Click Confirm to accept the change.
For SIP-T28P IP phone, the image logo displays on the idle screen. For SIP-T26P/T22P
IP phone, the image logo screen and the idle screen display alternately.