Specifications

Configuring Basic Features
45
Phone Lock
Phone lock is used to lock the IP phone to prevent it from unauthorized use. Once the IP
phone is locked, a user must enter the password to unlock it. IP phones offer three types
of phone lock: Menu Key, Function Keys and All Keys. The IP phone will not be locked
immediately after the phone lock type is configured. One of the following steps is also
needed:
- Long press the pound key when the IP phone is idle.
- Press the keypad lock key (if configured) when the IP phone is idle.
In addition to the above steps, you can configure the IP phone to automatically lock
the keypad after a period of time.
Procedure
Phone lock can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the type of phone
lock.
Change the unlock password.
Configure the IP phone to
automatically lock the keypad
after a time interval.
For more information, refer to
Phone Lock on page 264.
Assign a keypad lock key.
For more information, refer to
Keypad Lock Key on page 381.
Local
Web User Interface
Configure the type of phone
lock.
Change the unlock password.
Configure the IP phone to
automatically lock the keypad
after a time interval.
Navigate to:
http://<phoneIPAddress>/servl
et?p=features-phonelock&q=lo
ad
Assign a keypad lock key.
Navigate to:
http://<phoneIPAddress>/servl
et?p=dsskey&q=load&model=0