Specifications

Administrator’s Guide for SIP-T2xP IP Phones
42
3. Select the desired value from the pull-down list of Backlight Time (seconds).
4. Click Confirm to accept the change.
To configure backlight via phone user interface (only applicable to the SIP-T28P IP
phone):
1. Press Menu->Settings->Advanced Settings (password: admin) ->Phone
Settings->Backlight.
2. Press or , or the Switch soft key to select the desired level from the
Backlight Intensity field.
3. Press or , or the Switch soft key to select the desired type from the
Backlight Time field.
4. Press the Save soft key to accept the change.
User Password
Some menu options are protected with two privilege levels, user and administrator,
each with its own password. When logging into the web user interface, you need to
enter the user name and password to access various menu options.
A user or an administrator can change the user password. The default user password is
“user”. For security reasons, the user or administrator should change the default user
password as soon as possible.
Procedure
User password can be changed using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Change the user password of the
IP phone.
For more information, refer to
User Password on page 264.