Specifications

Administrator’s Guide for SIP-T2xP IP Phones
36
Navigate to:
http://<phoneIPAddress>/servlet
?p=settings-areacode&q=load
To configure an area code rule via web user interface:
1. Click on Settings->Dial Plan->Area Code.
2. Enter the desired values in the Code, Min Length (1-15) and Max Length (1-15)
fields.
3. Enter the desired line ID in the Account field or leave it blank.
If you leave this field blank or enter 0, the area code rule applies to all accounts on
the IP phone.
4. Click Confirm to accept the change.
Block Out
Block out rule prevents users from dialing out specific numbers. When entered numbers
match the predefined block out rule, the LCD screen prompts “Forbidden Number”. IP
phones support up to 10 block out rules.
Procedure
Block out rule can be created using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Create the block out rule for the
IP phone.
For more information, refer to Dial
Plan on page 258.
Local
Web User Interface
Create the block out rule for the
desired line.