Specifications

Getting Started
29
Configuring PC Port Mode
The PC port on the back of the IP phone is used to connect a PC, which can be
configured in one of two modes:
 Bridge: The IP phone functions as a bridge, and the connected PC appears on the
network as a stand-alone device with its own IP address.
 Router: The IP phone functions as a router, and provides a DHCP service to
connected PC.
Procedure
PC port mode can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the PC port mode.
For more information, refer to PC
Port Mode on page 256.
Local
Web User Interface
Configure the PC port mode.
Navigate to:
http://<phoneIPAddress>/servlet
?p=network-pcport&q=load
Phone User Interface
Configure the PC port mode.
To configure the PC port mode via web user interface:
1. Click on Network->PC Port.
2. Select the desired value from the pull-down list of PC Port Active.