Specifications

Administrator’s Guide for SIP-T2xP IP Phones
26
To configure PPPoE via web user interface:
1. Click on Network->Basic.
2. In the IPv4 Config block, mark the PPPoE radio box.
3. Enter the user name and password in corresponding fields.
4. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after reboot.
5. Click OK to reboot the IP phone.
To configure PPPoE via phone user interface:
1. Press Menu->Settings->Advanced Settings (password: admin) ->Network->WAN
Port->IPv4->PPPoE IP Client.
2. Enter the user name and password in corresponding fields.
3. Press the Save soft key to accept the change.
The IP phone reboots automatically to make settings effective after a period of
time.
Configuring Transmission Methods of the Internet Port and PC Port
Two Ethernet ports on the back of the IP phone: Internet port and PC port. Three
optional methods of transmission configuration for SIP-T2xP IP phone Internet or PC
Ethernet ports:
 Auto-negotiation
 Half-duplex
 Full-duplex
Auto-negotiation is configured for both Internet and PC ports on the IP phone by
default.