Specifications

Administrator’s Guide for SIP-T2xP IP Phones
368
Upgrading Firmware
Parameter-
auto_provision.mode
Configuration File
<y0000000000xx>.cfg
Description
Configures the auto provision mode.
Format
Integer
Default Value
1
Range
Valid values are:
0-Disabled
1-Power on (when the IP phone reboots)
4-Repeatedly (at a fixed interval)
5-Weekly (at the specified time)
6-Power on + Repeatedly
7-Power on + Weekly
Example
auto_provision.mode = 1
Parameter-
auto_provision.schedule.periodic_
minute
Configuration File
< y0000000000xx >.cfg
Description
Configures the interval (in minutes) for the
IP phone to check new configuration files.
Note: It works only if the parameter
“auto_provision.mode” is set to
4(Repeatedly) or 6 (Power on +
Repeatedly).
Format
Integer
Default Value
1440
Range
1 to 43200
Example
auto_provision.schedule.periodic_minut
e = 1440
Parameter-
auto_provision.schedule.time_from
Configuration File
< y0000000000xx >.cfg
Description
Configures the start time of day in 24-hour
period for the IP phone to check new
configuration files.