Specifications

Administrator’s Guide for SIP-T2xP IP Phones
22
3. Press the Save soft key to accept the change.
The IP phone reboots automatically to make settings effective after a period of
time.
Configuring Network Parameters Manually
If DHCP is disabled or IP phones cannot obtain network parameters from the DHCP
server, you need to configure them manually. The following parameters should be
configured for IP phones to establish network connectivity:
 IP Address
 Subnet Mask
 Default Gateway
 Primary DNS
 Secondary DNS
Procedure
Network parameters can be configured manually using the configuration files or
locally.
Configuration File
<y0000000000xx>.cfg
Configure network parameters of
the IP phone manually.
For more information, refer to
Static Network Settings on page
251.
Local
Web User Interface
Configure network parameters of
the IP phone manually.
Navigate to:
http://<phoneIPAddress>/servlet
?p=network&q=load
Phone User Interface
Configure network parameters of
the IP phone manually.
To configure the IP address mode via web user interface:
1. Click on Network->Basic.