Specifications

Appendix
347
Format
Boolean
Default Value
0
Range
0-Disabled
1-Enabled
Example
network.snmp.enable = 1
Parameter-
network.snmp.port
Configuration File
<y0000000000xx>.cfg
Description
Configures the port used for SNMP
communication.
Note: If you change this parameter, the IP
phone will reboot to make the change
take effect.
Format
Integer
Default Value
Blank
Range
1 to 65535
Example
network.snmp.port = 161
Parameter-
network.snmp.trust_ip
Configuration File
<y0000000000xx>.cfg
Description
Configures the IP addresses from which
SNMP requests will be accepted.
Multiple IP addresses are separated by
space.
If set to “0.0.0.0”, the IP phone accepts and
handles GET requests from any IP address.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
IP Address
Default Value
Blank
Range
Not Applicable
Example
network.snmp.trust_ip = 192.168.1.50
192.168.1.51