Specifications

Appendix
319
voice.tone.ring
voice.tone.busy
voice.tone.congestion
voice.tone.callwaiting
voice.tone.dialrecall
voice.tone.info
voice.tone.stutter
voice.tone.message
voice.tone.autoanswer
<y0000000000xx>.cfg
Description
Configures the tone for each condition.
tonelist = element[,element] [,element]…
Where
element = [!]freq1[+freq2][+freq3][+freq4]
/duration
Freq: the frequency of the tone (ranges from
200 to 7000 Hz). If set to 0 (0Hz), it means the
tone is not played. A tone can be
composited at most four different
frequencies.
Duration: the time duration (in milliseconds,
ranges from 0 to 30000ms) of the ring tone.
You can configure at most eight different
tones for one condition, each tone
separated by comma (e.g.,
250/200, !0/1000, 200+300/500,
600+700+800+1000/2000). The exclamation
point (!) can be added optionally, which
means these tones are only played once.
Note: It works only if the parameter
“voice.tone.country” is set to Custom.
Format
Refer to the introduction above
Default Value
Blank
Range
Not Applicable
Example
voice.tone.dial = 800+200/1000, 0/100,
500/1200, 500+600+950+1500/5000
Remote Phone Book
Parameter-
Configuration File