Specifications

Appendix
265
phone_setting.lock
<y0000000000xx>.cfg
Description
Configures the type of phone lock.
Menu Key: The Menu soft key and MESSAGE
key are locked (For T20P, the MENU key is
locked).
Function Keys: MESSAGE, RD, CONF, HOLD,
MUTE, TRAN, OK, X, navigation keys, soft keys,
line keys and memory keys are locked (For
T22P, CONF, HOLD, MUTE and memory keys do
not exist; For T20P, the MUTE key, soft keys and
memory keys do not exist, but the additional
MENU and Directory keys are locked).
All Keys: All keys are locked except the
volume key. You are only allowed to dial
emergency numbers, reject incoming calls by
pressing the X key, answer incoming calls by
lifting the handset, pressing the Speakerphone
key, the HEADSET key or the OK key, place an
active call on hold by pressing the Hold soft
key or the HOLD key, resume the held call by
pressing the Resume soft key or the HOLD key,
and end the call by hanging up the handset,
pressing the Speakerphone key or pressing the
X key (For T22P, HOLD key does not exist; For
T20P, soft keys do not exist).
If set to 0 (Disabled), IP phone lock feature is
disabled.
Format
Integer
Default Value
0
Range
Valid values are:
0-Disabled
1-Menu Key
2-Function Keys
3-All Keys
Example
phone_setting.lock = 1
Parameter-
phone_setting.phone_lock.unl
ock_pin
Configuration File
<y0000000000xx>.cfg
Description
Configures a new unlock password. Once the