Specifications

Appendix
259
Replaced, Line ID
Enabled/Disabled: Enables or disables the
replace rule.
Prefix: Specifies the string you want to replace.
Replaced: Specifies the alternate string
instead of what the user enters.
Line ID: Specifies the desired line to apply this
replace rule. The digit 0 stands for all lines.
X ranges from 1 to 100.
Note: Multiple line IDs are separated by
comma.
Format
Boolean, String, String, Integer
Default Value
Blank
Range
Valid values of Enabled/Disabled are:
0-Disabled
1-Enabled
Prefix, Replaced: Not Applicable
Valid values of Line ID are:
0 to 6 (for T28P)
0 to 3 (for T26P/T20P)
0 to 2 (for T20P)
Example
dialplan.item.1 = 1,123,0592,1,2,3
Dial-now
Parameter-
dialnow.item.x
Configuration File
<y0000000000xx>.cfg
Description
Configures the dial-now rule.
dialnow.item.x = Dial-now Rule, Line ID
Dial-now Rule: Specifies the string used to
match the numbers entered by the user.
When entered numbers match the predefined
dial-now rule, the IP phone will automatically
dial out the numbers without pressing the send
key.
Line ID: Specifies the desired line to apply this
dial-now rule. The digit 0 stands for all lines.
X ranges from 1 to 100.
Note: Multiple line IDs are separated by