Specifications

Administrator’s Guide for SIP-T2xP IP Phones
258
Example
network.pc_port.dhcp_server = 1
Parameter-
network.dhcp.start_ip
Configuration File
<y0000000000xx>.cfg
Description
Configures the start IP address that the IP
phone assigns for the PC attached to the PC
port when the PC port is configured as Router.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
IP Address
Default Value
10.0.0.10
Range
Not Applicable
Example
network.dhcp.start_ip = 10.0.0.10
Parameter-
network.dhcp.end_ip
Configuration File
<y0000000000xx>.cfg
Description
Configures the end IP address that the IP
phone assigns for the PC attached to the PC
port when the PC port is configured as Router.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
IP Address
Default Value
10.0.0.100
Range
Not Applicable
Example
network.dhcp.end_ip = 10.0.0.100
Dial Plan
Replace Rule
Parameter-
dialplan.item.x
Configuration File
<y0000000000xx>.cfg
Description
Configures the replace rule.
dialplan.item.x =Enabled/Disabled, Prefix,