Specifications

Appendix
251
Static Network Settings
Parameter-
network.internet_port.type
Configuration File
<MAC>.cfg
Description
Configures the Internet port type.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Integer
Default Value
0
Range
Valid values are:
0-DHCP
1-PPPoE
2-Static IP Address
Example
network.internet_port.type = 2
Parameter-
network.ip_address_mode
Configuration File
<MAC>.cfg
Description
Configures the IP address mode.
IP phones support to use the IPv4 address only,
the IPv6 address only or both IPv4 and IPv6
addresses.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Integer
Default Value
0
Range
Valid values are:
0-IPv4
1-IPv6
2-IPv4&IPv6
Example
network.ip_address_mode = 0
Parameter-
network.internet_port.ip
Configuration File
<MAC>.cfg
Description
Configures the IP address when the Internet