Specifications

Upgrading Firmware
221
Upgrading Firmware on page
368.
Local
Web User Interface
Configure the way for the IP
phone to check for
configuration files.
Navigate to:
http://<phoneIPAddress>/servl
et?p=settings-autop&q=load
To configure the way for the IP phone to check for new configuration files via web user
interface:
1. Click on Settings->Auto Provision.
2. Make the desired change.
3. Click Confirm to accept the change.
When the “Power On” is set to On, the IP phone will check for both firmware and
configuration files stored on the provisioning server during startup.