Specifications

Administrator’s Guide for SIP-T2xP IP Phones
192
Procedure
IPv6 can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the IPv6 address
assignment method.
For more information, refer to
IPv6 on page 353.
Local
Web User Interface
Configure the IPv6 address
assignment method.
Navigate to:
http://<phoneIPAddress>/servl
et?p=network&q=load
To configure IPv6 address assignment method via web user interface:
1. Click on Network->Basic.
2. Select the desired address mode (IPv6 or IPv4&IPv6) from the pull-down list of
Mode (IPv4/IPv6).
3. In the IPv6 Config block, mark the DHCP or the Static IP Address radio box.
If you mark the Static IP Address radio box, configure the IPv6 address and other
configuration parameters in the corresponding fields.
4. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after reboot.
5. Click OK to reboot the IP phone.