Specifications

Administrator’s Guide for SIP-T2xP IP Phones
148
Procedure
Configuration changes can be performed using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Assign a multicast paging key.
For more information, refer to
Multicast Paging Key on page
391.
Specify a multicast codec for the
IP phone to use for multicast RTP.
For more information, refer to
Sending RTP Stream on page 331.
Local
Web User Interface
Assign a multicast paging key.
Navigate to:
http://<phoneIPAddress>/servlet
?p=dsskey&q=load&model=0
Specify a multicast codec for the
IP phone to use for multicast RTP.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Phone User Interface
Assign a multicast paging key.
To configure a multicast paging key via web user interface:
1. Click on DSSKey->Memory Key (or Line Key).
2. In the desired memory key (or line key) field, select Multicast Paging from the
pull-down list of Type.
3. Enter the multicast IP address and port number in the Value field.
The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.