Specifications

Configuring Basic Features
117
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced.
4. Select the desired value from the pull-down list of the Caller ID Source.
5. Click Confirm to accept the change.
Connected Line Identification Presentation
Connected line identification presentation (COLP) allows IP phones to display the
identity of the callee specified for outgoing calls. IP phones can display the Dialed
Digits, or the identity in a SIP header (Remote-Party-ID or P-Asserted-Identity) received,
or the identity in the From header carried in the UPDATE message sent by the callee as
described in RFC 4916.
If the callee has existed in the directory, the local name assigned to the callee should
be preferentially displayed.
Procedure
COLP can be configured only using the configuration files.
Configuration File
<MAC>.cfg
Configure the presentation of
the callee’s identity.
For more information, refer to
Connected Line Identification
Presentation on page 310.