Specifications

Configuring Basic Features
115
Web server type can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the web access
type, HTTP port and HTTPS port.
For more information, refer to
Web Server Type on page 308.
Local
Web User Interface
Configure the web access
type, HTTP port and HTTPS port.
Navigate to:
http://<phoneIPAddress>/servl
et?p=network-adv&q=load
Phone User Interface
Configure the web access
type, HTTP port and HTTPS port.
To configure web server type via web user interface:
1. Click on Network->Advanced.
2. Select the desired value from the pull-down list of HTTP.
3. Enter the HTTP port number in the HTTP Port (1~65535) field.
The default HTTP port number is 80.
4. Select the desired value from the pull-down list of HTTPS.
5. Enter the HTTPS port number in the HTTPS Port (1~65535) field.
The default HTTPS port number is 443.
6. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after reboot.