Specifications

Configuring Basic Features
103
?p=features-transfer&q=load
To configure Transfer on Conference Hang up via web user interface:
1. Click on Features->Transfer.
2. Select the desired value from the pull-down list of Transfer on Conference Hang up.
3. Click Confirm to accept the change.
Directed Call Pickup
Directed call pickup is used for picking up an incoming call on a specific extension. A
user can pick up the incoming call using a directed pickup key or the DPickup soft key
(not applicable to the SIP-T20P IP phone). This feature depends on support from a SIP
server. For many SIP servers, directed call pickup requires a directed pickup code,
which can be configured on a phone or a per-line basis.
Note
Procedure
Directed call pickup can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure the directed call
pickup code on a per-line
basis.
For more information, refer to
Directed Call Pickup on page
305.
It is recommended not to configure the directed call pickup key and the DPickup soft
key simultaneously. If you do, the directed call pickup key will not be used correctly.