User Guide

Customizing Your Phone
43
Screen Saver
The screen saver will automatically start when the IP phone is idle for the preset waiting time.
The screen saver is used to blank the screen or fill it with moving images or patterns.
The screen saver will be stopped if one of the following phone events occurs:
 Press any key.
 Pick up/hang up the handset.
 There is an incoming call.
 A new prompt (e.g., missed call, new voice mail or forwarded call).
 The status of BLF key changes.
If your phone is idle again for a specified period of time, the screen saver will start again. The
time & date and certain feature status icons (e.g., auto answer, DND, a new text message) will
also display on the screen saver. For more information on the icons, refer to Icon Instructions on
page 3. You can configure the phone whether to display the time & date on the screen saver or
not.
You can configure the screen saver of SIP-T29G IP phone, and upload custom pictures to set up
a screen saver of your picture via web user interface. You can configure the screen saver wait
time, screen saver type and screen saver display clock via phone user interface or web user
interface.
The SIP-T29G IP phone supports the file format of custom pictures in the following table:
Format
Resolution
Note
*.jpg/*.png/*.bmp/*.jpeg
<=1.8
megapixels
2MB of space should be reserved
for the phone
Uploading the Custom Picture
To upload a custom picture via web user interface:
1. Click on Settings->Preference.
2. Select Custom from the pull-down list of Screensaver Type.