User Guide

Advanced Phone Features
169
4. Click Confirm to accept the change.
Note
To configure BLF ring type via phone user interface:
1. Press Menu->Basic->Sound->BLF Ring Type.
2. Press or to select the desired ring tone.
3. (Optional.) Press to adjust the ringer volume.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
BLF ring type is configurable via web user interface at the path Features->Call Pickup.
When the monitored line receives an incoming call, the following occurs on your phone:
 The phone plays a specific ring tone (if enabled).
 The BLF key LED flashes red.
 The caller ID appears on the LCD screen (if enabled).
In the following figure, the LCD screen shows an incoming call from 1052 on the monitored line.
You can do the following actions:
- Press the Pick Up soft key to pick up the call.
- Press the Send soft key to dial out the monitored phone number.
- Press the New Call soft key to place a new call.
Visual and audio alert features are configurable via web user interface only.