User Guide

User Guide for the SIP-T29G IP Phone
158
- Press on the phone where the call is parked.
- Enter the desired extension followed by # (e.g., 4606#) on any phone.
Note
Transfer Mode
To configure call park feature in transfer mode via web user interface:
1. Click on Features->Call Pickup.
2. Select Transfer from the pull-down list of Call Park Mode.
3. Select Enabled from the pull-down list of Call Park.
If Enabled is selected, the Park soft key will display on the LCD screen during a call, and
the Retrieve soft key will display on the dialing screen.
4. (Optional.) Enter the call park code in the Call Park Code field.
It is configured for the Park soft key. This call park code will also apply to the call park key.
5. (Optional.) Enter the park retrieve code in the Park Retrieve Code field.
It is configured for the Retrieve soft key. This park retrieve code will also apply to the
retrieve park key.
6. Click Confirm to accept the change.
Note
If the Park or Retrieve soft key doesn’t appear on the LCD screen, please select Disabled from
the pull-down list of Custom Softkey via web user interface at path Settings->Softkey
Layout.
You can also press the desired BLF or BLF list key to park a call or retrieve a parked call directly.
For more information, refer to Parking a Call/Retrieving a Parked Call to the Monitored User
on
page 174.