Manualshelf

User Guide

ManualsBrandsYealink ManualsOffice ElectronicsYealink T29G IP Phone, 16 Lines. 4.3-Inch Color Display. USB 2.0, Dual-Port Gigabit Ethernet, 802.3af PoE, Power Adapter Not Included (SIP-T29G)
101102103104105106107108109110
User Guide for the SIP-T29G IP Phone
94
The Bluetooth device is disconnected. To connect it to your IP phone again, press the
Connect soft key.
Deleting the Paired Bluetooth Device
You can delete your Bluetooth device from your phone. When you delete the Bluetooth device,
it will disappear from the Paired Bluetooth Device list. To connect it to your IP phone again,
you need to scan and connect it again.
To delete your Bluetooth device from your phone:
1. Press Menu->Basic->Bluetooth->Paired Bluetooth Device.
2. Select the Bluetooth device you want to delete.
3. Press the Option soft key, and then select Delete from the prompt list.
The LCD screen prompts the following warning “Delete selected item?”.
4. Press the OK soft key to confirm the deletion or the Cancel soft key to cancel.
Note
Deactivating the Bluetooth Mode
To deactivate the Bluetooth mode via phone user interface:
1. Press Menu->Basic->Bluetooth.
2. Press or , or the Switch soft key to select Off from the Bluetooth field.
3. Press the Save soft key to accept the change.
The Bluetooth icon disappears from the phone.
The Bluetooth headset won’t be connected anymore, but it will still be paired. When you
activate the Bluetooth mode again, the paired Bluetooth headset will appear in the Paired
Bluetooth Devices list.
Bluetooth mode is configurable via web user interface at the path Features->Bluetooth.
You can also delete all devices by pressing the Option soft key and then select Delete All. For
more information, refer to the above steps.
If you cannot connect a Bluetooth device to the phone successfully, we recommend that you
delete the Bluetooth headset from the Paired Bluetooth Device list (if it exists) before pairing it.