Operation Manual

Enterprise IP Phone Getting Started

- 5 -

access the web configuration page. Please consult your system administrator for help.

Network Settings

Choose Network->Internet Port (WAN),

DHCP: Under the default situation the phone attempts to contact a DHCP Server in

your network in order to obtain its valid network settings, e.g. IP address, sub mask,

gateway, DNS server, etc.

Static IP Address: If your phone cannot contact a DHCP Server for any reason, you

need to enter the network settings manually via Static IP Address. Please contact your

internet administrator for more details.

PPPoE: If you are using the xDSL Modem, you can connect your phone to the internet

via PPPoE mode. Please contact your ISP for the User Name and Password for internet

access.

Note:

Using the wrong network parameters may result in inaccessibility of your phone and

may also have an impact on your network performance. Please contact your network

administrator.

Account Settings

The phone attempts to register to the SIP server using the account data provided by the

automatic or manual initialization.

Choose Account, you will find the following parameters:

Field

Description

It shows the register status of the phone.

Account Active

You can choose on/off to enable/disable the account

respectively.

Label

The name showing on the LCD of current device.

Display Name

The local phone name showing on the other phone when

calling.

User Name

User account information, provided by ISP.

Password

Account password provided by ISP.

SIP Server

SIP server address provided by ISP.

When you have finished the Network and Account Setting configuration, the Register

Status Icons will show in the idle screen:

Registered successfully

Registering

When all accounts register fail, phone will display "No Service" by default.

When the phone reboot, it will register automatically. If many phones register at the

same time, this will affect the server, the users can set the register power up time so