Specifications

User Guide for the SIP-T26P IP Phone
24
To change the administrator password via phone user interface:
1. Press Me nu->Settings->Advanced Settings (password: admin) ->Se t Password.
2. Enter the old password in the Current PWD field.
3. Enter the new password in the Ne w PWD field.
4. Enter the new password again in the Confirm PWD field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Administrator password is configurable via web user interface at the path
Security->Password.
You can set the “#” or “*” to perform as a send key while dialing.
To configure key as send via phone user interface:
1. Press Me nu->Features->Key as Send.
2. Press or , or the Switch soft key to select # or * from the Ke y as Send field,
or select Disable to disable this feature.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
Key as send is configurable via web user interface at the path F e atures->General
Information.
You can lock the keypad of your phone temporarily when you are not using it. This
feature helps you to protect your phone from unauthorized use.
Keypad lock consists of the following:
Menu Key: The Me nu soft key and MESSAGE key are locked. You cannot