Manualshelf

User Guide

ManualsBrandsYealink ManualsOffice ElectronicsYealink [4-Pack] T23G IP Phone, 3 Lines. 2.8-Inch Graphical LCD. Dual-Port 10/100 Ethernet, 802.3af PoE, Power Adapter Not Included (SIP-T23G-4)
41424344454647484950
Triggering the IP Phone to Perform the Auto Provisioning
39
Description of Configuration Parameters in CFG Files.xlsx
or
Yealink_SIP-T5_Series_Smart_Media_Phones_Description of Configuration Parameters in CFG
Files.xlsx
.
This method requires server support.
The following figure shows the message flow:
Auto Provisioning via Activation Code
In addition to the updating modes introduced above, users can trigger IP phones to perform
auto provisioning by dialing an activation code. To use this method, the activation code and the
provisioning server URL need to be pre-configured on the IP phones. This method works only if
there is no registered account on the IP phone. It is normally used for IP phones distributed by
retail sales. It has the advantage that the IP phones do not need to be handled (e.g., registering
account) before sending them to end-users.