User Guide

Triggering the IP Phone to Perform the Auto Provisioning
35
3. Enter the desired interval time (in minutes) in the Interval(Minutes) field.
4. Click Confirm to accept the change.
Weekly
The IP phone performs the auto provisioning process at a random time every
week/month/quarter. You can configure what time of the day and which day of the week to
trigger the IP phone to perform the auto provisioning process. You can also configure a regular
week interval to trigger the IP phone to perform the auto provisioning process. You can specify
the delay time to perform an auto provisioning process when the IP phone is inactive at regular
week. For example, you can configure the IP phone to check and update new configuration only
when the IP phone has been inactivated for 10 minutes between 2 to 3 o’clock in the morning
every Monday for a 4-week interval.
If you configure two or more days in a week, the auto provisioning only occurs at a random day.
To activate the weekly mode via web user interface:
1. Click on Settings->Auto Provision.
2. Mark the On radio box in the Weekly field.
3. Enter the desired upgrade interval in the Weekly Upgrade Interval(0~12week) field.
4. Enter the desired value in the Inactivity Time Expire(0~120min) field.
5. Enter the desired time in the Time field.