Manualshelf

User Guide

ManualsBrandsYealink ManualsOffice ElectronicsYealink [4-Pack] T23G IP Phone, 3 Lines. 2.8-Inch Graphical LCD. Dual-Port 10/100 Ethernet, 802.3af PoE, Power Adapter Not Included (SIP-T23G-4)
31323334353637383940
Yealink IP Phones Auto Provisioning Guide
26
4. Click Confirm to accept the change.
When Zero Touch is enabled, there will be a configuration wizard during startup:
Press the OK soft key.
The network parameters are configurable via phone user interface:
Press the Next soft key after finishing network settings.
Configure the provisioning server address, authentication user name (optional) and password
(optional) in the Auto Provision screen.
An example of screenshot is shown as below:
Press the OK soft key.
After the above configuration is completed, the IP phone will connect to the configured
provisioning server and perform the auto provisioning process during startup.
Plug and Play (PnP) Server
Yealink IP phones support obtaining the provisioning server address from the PnP server. The IP
phone broadcasts the PnP SUBSCRIBE message to obtain the provisioning server address during
startup. To use Plug and Play, make sure this feature is enabled.
To configure PnP via web user interface:
1. Click on Settings->Auto Provision.