User Guide

User Guide for the SIP-T23P/G IP Phone
32
Registration
Generally, your phone will be deployed with multiple other phones. In this case, your system
administrator will configure the phone parameters beforehand, so that after you start up your
phone, the phone will be registered and ready for use. The SIP-T23P/G IP phone supports up to
3 accounts. If your phone is not registered, you may have to register it. For more information on
how to register your phone, refer to Account Management on page 79.
Idle Screen
If the phone has successfully started up, the idle LCD screen will be displayed as below.
The idle screen displays the label of default account, time and date, and four soft keys.
Note
Entering Data and Editing Fields
You can enter data and edit fields using the phone keypad.
Keypad on the phone provides different characters (or numbers) when using the 2aB, abc, Abc,
ABC or 123 input mode. You can change the following input modes to enter data and edit fields
on your phone. When your phone keypad matches the input mode, you can press the keypad
repeatedly to view the character (or number) options and stop to select. When the character (or
number) you want to enter displays in the field, wait for one second, and enter the next
character (or number).
The following table lists the input modes and character (or number) options for the keypad:
Input Mode
Keypad
2aB
abc
Abc
(initials in
capitals)
ABC
123
1
1
2abcABC
abc2äæåàá
âãç
abc2äæåàá
âãç
ABC2ÄÆÅ
ÀÁÂÃÇ
2
You can configure the phone not to display the label of default account, contact your system
administrator for more information.