User Guide

User Guide for the SIP-T23P/G IP Phone
116
and search for the contact (Directory should be configured in advance. Refer to
Directory on page 50 and Remote Phone Book on page 61 for more information).
Press , or the Send soft key to dial out.
- If Allow Trans Exist Call (refer to Allow Trans Exist Call on page 112) is enabled, you
can select the NewCall and repeat steps mentioned above to complete transfer.
3. Press or the Trans soft key to complete the transfer when receiving ringback.
If you are using a handset, the transfer can be completed by hanging up the handset.
Attended Transfer
Before performing an attended transfer (except you use dial number method), make sure that
the transfer mode on DSS key is configured as New Call or Attended Transfer. For more
information on how to configure it, refer to Configuring Transfer Mode on DSS Key on page
134.
To perform an attended transfer:
1. Press or the Trans soft key during a call.
2. Do one of the following:
- Enter the number you want to transfer the call to.
Press or to dial out.
- Press the Dir soft key, and then select Local Directory. Select the desired group and
search for the contact (Directory should be configured in advance. Refer to Directory
on page 50 for more information).
Press , or the Send soft key to dial out.
- Press the Dir soft key, and then select History. Select the desired list and then press
or to select the entry (Directory should be configured in advance. Refer to
Directory on page 50 for more information).
Press , or the Send soft key to dial out.
- Press the Dir soft key, and then select Remote Phone Book. Select the desired group
and search for the contact (Directory should be configured in advance. Refer to
Directory on page 50 and Remote Phone Book on page 61 for more information).
Press , or the Send soft key to dial out.
- If Allow Trans Exist Call (refer to Allow Trans Exist Call on page 112) is enabled, you
can select the NewCall and repeat steps mentioned above to complete transfer.
3. After the party answers the call, press or the Trans soft key to complete the transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
You can cancel the transfer before the call is connected by pressing the Cancel soft key.