User Guide

User Guide for the SIP-T23P/G IP Phone
114
on page 50 for more information).
Press , or the Send soft key to complete the transfer.
- Press the Dir soft key, and then select History. Select the desired list and then press
or to select the entry (Directory should be configured in advance. Refer to
Directory on page 50 for more information).
Press , or the Send soft key to complete the transfer.
- Press the Dir soft key, and then select Remote Phone Book. Select the desired group
and search for the contact (Directory should be configured in advance. Refer to
Directory on page 50 and Remote Phone Book on page 61 for more information).
Press , or the Send soft key to complete the transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
You can also perform a blind transfer to another existing call when there are multiple calls.
Before performing a blind transfer to another existing call, make sure that the Allow Trans Exist
Call is enabled. For more information, refer to Allow Trans Exist Call on page 112.
To perform a blind transfer during multiple calls:
1. Press or the Trans soft key during a call.
2. You can do one of the following:
- Press or to select the desired hold call you want to transfer the call to.
- Select New Call, you can do one of the following:
 Enter the number you want to transfer the call to.
Press or the Trans soft key to complete the transfer.
If you are using a handset, the transfer can be completed by hanging up the
handset.
 Press the Dir soft key, and then select Local Directory. Select the desired group
and search for the contact (Directory should be configured in advance. Refer to
Directory on page 50 for more information).