User Guide

User Guide for the SIP-T23P/G IP Phone
112
4. Press or , or the Switch soft key to select Disabled to deactivate the call forward.
If you want to deactivate call forward for all accounts, press the All Lines soft key.
5. Press the Save soft key to accept the change.
Dynamic Forwarding
You can manually forward a call to another number while your phone rings.
To forward an incoming call to another party:
1. When the phone is ringing, press the FWD soft key.
2. Enter the number you want to forward the incoming call to.
3. Press , , or the Send soft key.
The LCD screen prompts a call forward message.
Note
Call Transfer
You can transfer a call to another party during a call in one of three ways:
 Blind Transfer: Transfer a call directly to another party without consulting.
 Semi-Attended Transfer: Transfer a call when the target phone is ringing.
 Attended Transfer (Consultative Transfer): Transfer a call with prior consulting.
Allow Trans Exist Call
You can also perform a blind transfer to the exist call that is held.
To enable allow trans exist call via web user interface:
1. Click on Features->General Information.
When the phone forwards a call, a prompt window will pop up by default, if you want to disable
the feature, contact your system administrator for more information.