User Manual
Table Of Contents
- About This Guide
- Table of Contents
- Overview
- Getting Started
- Customizing Your Phone
- Basic Call Features
- Advanced Phone Features
- Troubleshooting
- Regulatory Notices
- Appendix A - Time Zones
- Index
User Guide for the SIP-T21(P) E2 IP Phone
78
When the called party is busy, the following prompt will appear on the LCD screen
of the phone:
2. Press the OK soft key to redial the number.
Note
You can press a recall key to place a call back to the last incoming call.
To configure a recall key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select a desired DSS key.
3. Press or , or the Switch soft key to select Key Event from the Type field.
4. Press or , or the Switch soft key to select ReCall from the Key Type field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Recall key is configurable via web user interface at the path DSSKey->Line Key.
Call completion is not available on all servers. For more information, contact your system
administrator.