User Manual
Table Of Contents
- About This Guide
- Table of Contents
- Overview
- Getting Started
- Customizing Your Phone
- Basic Call Features
- Advanced Phone Features
- Troubleshooting
- Regulatory Notices
- Appendix A - Time Zones
- Index
User Guide for the SIP-T21(P) E2 IP Phone
32
2. Press the AddGr soft key.
3. Enter the desired group name in the Name field.
4. Press or to select the desired group ring tone from the Ring field.
If Auto is selected, this group will use the ring tone specified for the contact. If no
ring tone is specified for the contact, it will then play the ring tone specified for the
account. For more information on the ring tone for the account, refer to Ring Tones
on page 27.
5. Press the Add soft key to accept the change or the Back soft key to cancel.
You can also edit or delete any newly added contact groups.
To edit a group in the local directory:
1. Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory
enabled in the directory by default.
If Local Directory is removed from the directory, press Menu->Directory->Local
Directory to enter the local directory.
2. Select the desired group.
3. Press the Option soft key, and then select Detail.