User Manual
Table Of Contents
- About This Guide
- Table of Contents
- Overview
- Getting Started
- Customizing Your Phone
- Basic Call Features
- Advanced Phone Features
- Troubleshooting
- Regulatory Notices
- Appendix A - Time Zones
- Index
User Guide for the SIP-T21(P) E2 IP Phone
100
To configure the group call pickup code on a per-line basis via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced.
4. Enter the group call pickup code in the Group Call Pickup Code field.
5. Click Confirm to accept the change.
To pick up a call in the group:
1. Pick up the handset, press the speakerphone or press the line key.
The GPickup soft key appears on the LCD screen.
2. Press the GPickup soft key on your phone when a phone in the group receives an
incoming call.
The call is answered on your phone.