User guide

Downloading and Verifying Configurations

Parameters

Permitted Values

Default

If it is set to 1 (Enabled), the IP phone will periodically upload the <MAC>-local.cfg file to

the provisioning server to back up this file. During auto provisioning, the IP phone will

download the <MAC>-local.cfg file from the provisioning server to override the one

stored on the phone.

If it is set to 0 (Disabled), the IP phone will not upload the <MAC>-local.cfg file to the

provisioning server. During auto provisioning, the IP phone will not download the

<MAC>-local.cfg file from the provisioning server.

auto_provision.custom.upload_method

0 or 1

Description:

Configures the way the IP phone uploads the <MAC>-local.cfg file to the provisioning

server (for HTTP/HTTPS server only).

0-PUT

1-POST

Note: It works only if the value of the parameter ―auto_provision.custom.sync‖ is set to 1

(Enabled).

For more information on how to configure these parameters in different scenarios, refer

to the following introduced scenarios.

The administrator wishes to upgrade firmware from the old version to the latest version.

Meanwhile, protect personalized settings after auto provisioning and upgrade.

Scenario Conditions:



SIP-T23G IP phone current firmware version: 44.80.0.1. This firmware supports

protecting personalized settings and generating a <MAC>-local.cfg file.



SIP-T23G IP phone target firmware version: 44.80.0.5. This firmware supports

support protecting personalized settings and generating a <MAC>-local.cfg file.



SIP-T23G IP phone MAC: 001565770984



Provisioning server URL: tftp://192.168.1.211



Place the target firmware to the root directory of the provisioning server.

The old firmware version supports protecting personalized settings and generating a

<MAC>-local.cfg file. To protect personalized settings after auto provisioning and

upgrade, you need to configure the value of the parameter

―auto_provision.custom.protect‖ to 1 in the configuration file.