User guide

Configuring the Update Mode
45
2. Click Autoprovision Now.
The IP phone will perform the auto provisioning process immediately.
You can activate more than one update mode for auto provisioning. For example, you
can activate the ―Power On‖ and ―Repeatedly‖ modes simultaneously. The IP phone
will perform the auto provisioning process when it is powered on and at a specified
interval.
The IP phone will perform the auto provisioning process when receiving a SIP NOTIFY
message which contains the header ―Event: check-sync‖. Whether the IP phone reboots
or not depends on the value of the parameter ―sip.notify_reboot_enable‖. If the value is
set to 1, or the value is set to 0 and the header of the SIP NOTIFY message contains an
additional string ―reboot=true‖, the IP phone will reboot immediately. For more
information on the parameter ―sip.notify_reboot_enable‖, refer to Description of
Configuration Parameters in CFG Files on page 91.
This update mode requires server support.